Question on the Purist Audio Limited Edition P/C's

What power cords are you "upgrading" from? And why did you decide to start at the amp and then next to the preamp? My experience with power cords is that the digital components and phono/line stages react far more to power cords than do amps.

The logical thing to do would be to try a single new cord in the system, at each of the 4 places and leave the other 3 original in the system. You do not need to live with this change for days or weeks. The change should be noticeable instantly. Following this experiment 4 times, you will have an idea as to what components in the system react the most to the cord change. Then you can decide what is the additive benefit of 2 or 3 or 4 of these new cords.

Different components and ones of different brands react differently to an aftermarket powercord.
i disagree with the previous post and say yeah the amp is the #1 place to start with a cord.
Other than that, i would chalk it up to your preamp did not need the better cord as much as the amp did. It is the combination oof cord and powersupply i nthe electronics that makes the changes. Some more, some less.
i would not generalize about the changes lessening.
If i were you, i would go ahead a try the cords on other items in your system. See if some electronics benefit more than others do.
I use a pile of cheap Pangea powercords and have three different powerline conditioners and have swapped cords between the 9 and 14SE cords, and around the varous conditioners to find the best sound.
Some items do better one way or another.

Thank you for your responses....my entire system is Purist Audio 20th Anniversary cables. So, the cables I am '' repalcing '' are PAD's 20 Anniversary's.....I have always started with the pieces that have the bigger(est) power supplies with any changes in power cords. I was hoping to hear from members who have or who are using this paricular power cords in their system.