2. speakers
  3. 1227229922

Questions for Vandersteen 5A owners...

I finally got to audition 5A's yesterday. Involved 9 hours of driving, but it was worth it. :-)

I realize no speaker is perfect and it's a matter of tradeoffs. I am attracted to Vandersteen because of a strong reputation and the fact that it includes a powered bass module with 11 bands of EQ per speaker. I have a troublesome room. Currently have Aerial model 9s - a great speaker but not ideal for my room.

Anyway, I wanted to post my impressions and see what owners have to say.

1) Larger than life sound. Holy big imagery. High hats sounded like they were 3 feet in diameter.

2) Wide dispersion of sound (i.e. large sweetspot). Vocals stretched from speaker to speaker. Panning of instruments off center was hard to pinpoint.

3) Bass seemed EQd well (couldn't hear any notes being louder than others) but all in all it wasn't as articulate as I expected. Bass was very fat sounding.

4) Problem at loud volumes? It might have been the 200 watt amp, but when the volume was cranked it was very distorted. I notice that Stereophile recommends the speaker but says "won't play as loud as other speakers". I have never experienced a speaker that had a volume limitation per se, so I'm not sure what to expect - distortion or were they simply meaning it wasn't very sensitive? I don't listen to music at crazy volumes, but these would also be used for home theater - where speakers should be able to handle loud peaks. Have any of you noticed this?

5) A lot brighter than I expected and very revealing. Highs sounded less smooth/laid back than I expected (or was used to for that matter). Almost harsh at times. Could have been the recordings, but I played stuff I was very familiar with so I'm puzzled here.

6) Midrange was very nice.

Anyhow, I'm interested in others' perceptions here as I can't audition these in my own home. I do believe that the dealer could set up the bass well in my room, but am generally worried about some of the points above.

Thanks in advance.
madfloyd
madfloyd OP
411 posts
 
I heard the speakers in NJ; I live in Massachusetts. It was 4.5 hours each way.

The dealer was excellent as was the speakers (overall). I'm sure setup could be tweaked a little - as it's subjective to a certain degree (apparently you smooth out humps, not flatten them or it will sound EQ'd)

I agree that it would be good to re-audition them - even if in same room, with same equipment. I considered Rockport Ankas and auditioned them 3 times. I'm not up for that much driving anytime soon however.

Overall I liked the speaker a lot - I just wasn't expecting such huge, larger than life imagery or the distortion at loud volumes. That being said, my Aerials produce a smaller-than-life soundstage, although they image very well and timbre is great. Piano sounded different on the 5As - another aspect I would like to audition again, but I don't know that the timbre was incorrect - I might just be too used to the Aerials. Sometimes you have to get used to the sound of a speaker.

I agree that in theory, the design of the 5A seems excellent.

stringreen's avatar
stringreen
5,112 posts
 
If you listened to the 5A's in NJ at Audio Connection with the best dealer I've ever encountered in this long affair with high end stereo, I can totally recommend John and his crew for excellent setup and a great deal. John really knows his stuff and is extremely helpful. He will check every parameter and tweek it without checking his watch and running out before its perfect. You will be satisfied.
zargon's avatar
zargon
453 posts
 
Chadlinz,

WRT toe-in, I agree that in large rooms (>18 ft wide) it is not necessary nor advisable to toe these speakers in. They image best straight ahead. However, at CES Richard regularily uses some toe-in in the hotel rooms which run more like 14-15 ft wide. He only recommends it to reduce the side wall first order reflection.

Interestingly, he has be come a proponant of diffusion on side and front walls as well. I like the use of diffusion, but I have found that diffusion works best when the sound wave strikes it near head on at a distance (>4 ft), something that is not possible when used in a narrower room on the side wall.
zargon's avatar
zargon
453 posts
 
Sonofjim,
One additional tid bit I learned from Richard about the new 7As which hasn't been mentioned. The midrange cone is formed from balsa (by turning it on a lathe), and is then reinforced with carbon fiber. This forms a kind of truss which is very light, yet very stiff. It has the properties of being more "pistonic", e.g. responding quickly, having less troublesome breakup modes, and being internally better damped when breakup does occur. As I understand it, this midrange is one of the upgrades that would be available to original 5A owners. Seems like this has the potential of being quite noticable.
mrjstark
1,112 posts
 
Middle range driver alone will set you back about $3500 - not including labor.
40k is also nothing to sneeze at.
Candy apple red is the color of the first pair which will debut in 2009 CES.
No veneer options as far as I know.
More to discover