I have the diskdoctor brush and it is pretty good. i have also discovered a cheap but effective brush at Walgreens. It is a lint brush (they have a lint mitt) that has short but stiff microfiber bristles that easily equals the diskdoctor for three bucks. i use the mitt for cleaning the records using a vacuum system. I also include a steam cleaning regiment in the mix. i use the diskdoctor brush for my final water rinse. My cleaning solution is homemade but disk doctor, walker or aivs makes good solutions also. I tend to cheap out by making my own. If you are interested, the lint brush is made by evercare. As for as solution volume, i put plenty of liquid on the record. I am a firm believer in "dilution is part of the solution"
Record cleaning Q's - brushes and fluid
Hi all. I just picked up a VPI 16.5 here on Agon (thanks Lptube) and I've started cleaning 5 years worth of collected vinyl. Hoping to pick up a couple tips from the community here.
What kind of brushes are you using? I have the nylon bristle brush that came with the vpi and I'm not crazy about it. Doesn't do a great job of spreading the fluid and the handle is a hard chunk of smooth plastic. Difficult to hold and seems like it's dangerous to the lp if dropped, which I have done several times. I also have a mfsl brush, which has a nice microfiber velvet pile. Spreads the fluid really well and the handle is a nice soft rubber too. Problem is the brush is like 2" wide and all that fiber soaks up a lot of (expensive) fluid. Does anyone know of a brush type with the microfiber/velvet pile that's not quite as big? Before I spend a 100 bucks buying different brushes figured I'd look for some advice.
This brings me to the next question - how much fluid do you use? I'm using the audio intelligent 3-step (rinsing with whole foods filtered water though, not the AI stuff). I find it takes a lot more than the 1/10th of an ounce AI recommends to really saturate one side of an LP. Since none of my vinyl has ever been wet or vacuum cleaned, I'm using the enzyme cleaner to soak it for a while in step one. It seems to take as much as 1/3 of an ounce to really get the LP wet and keep it that way for a 10 minute soaking session without "dry spots" opening up. Am I using too much fluid? How wet does one need to get the LP to ensure a really good cleaning?
Thanks for any responses.
Jon.
What kind of brushes are you using? I have the nylon bristle brush that came with the vpi and I'm not crazy about it. Doesn't do a great job of spreading the fluid and the handle is a hard chunk of smooth plastic. Difficult to hold and seems like it's dangerous to the lp if dropped, which I have done several times. I also have a mfsl brush, which has a nice microfiber velvet pile. Spreads the fluid really well and the handle is a nice soft rubber too. Problem is the brush is like 2" wide and all that fiber soaks up a lot of (expensive) fluid. Does anyone know of a brush type with the microfiber/velvet pile that's not quite as big? Before I spend a 100 bucks buying different brushes figured I'd look for some advice.
This brings me to the next question - how much fluid do you use? I'm using the audio intelligent 3-step (rinsing with whole foods filtered water though, not the AI stuff). I find it takes a lot more than the 1/10th of an ounce AI recommends to really saturate one side of an LP. Since none of my vinyl has ever been wet or vacuum cleaned, I'm using the enzyme cleaner to soak it for a while in step one. It seems to take as much as 1/3 of an ounce to really get the LP wet and keep it that way for a 10 minute soaking session without "dry spots" opening up. Am I using too much fluid? How wet does one need to get the LP to ensure a really good cleaning?
Thanks for any responses.
Jon.
- ...
- 8 posts total
- 8 posts total