2. amps-preamps
  3. 1205635448

Rowland Concerto integrated vs Rowland Capri & 102

Extensive searching on AG, and Google for that matter, has resulted in little definitive info, just a couple of second hand comments that "maybe" the Capri/102 bests the older Concerto integrated.

I already own the 102 amp, so the Capri seems like an obvious choice, but the Concerto's 250W seems like it would have more punch, on paper at least, over the 100W 102. One less IC, one less power cord, and even the nice blue display are also more enticing.

Anyone have any real world experience/opinions on one over the other?

Thanks!
rkny
dcstep
1,518 posts
 
Good stuff Guido. Ultimately you'll need to explore the Continuum vs. the 312/Capri setup. Hopefully I'll be able to do that for myself very soon.

I've now heard the Capri driving Mahlers through a 312 and the DALI Helicon 400.Mk2 through the 501s. It's a stunningly open, transparent and smooth preamp in those applications. In neither case did we have a PC1 in the loop. Still, it's wonderful to hear your comparison to a reference like the Ref 3.

The DALI in particular could be hard on a preamp, given its very extended top end. You really hear the fingers on strings and breath-taking of singers and any edge on a voice or instrument with the DALIs. (The tweeter module has both a ribbon and dome drivers). Never was I uncomfortable with any material, even played at pretty high levels. With the Capri I heard these high extensions as delicacy, not hardness.

Dave
guidocorona
4,114 posts
 
"With the Capri I heard these high extensions as delicacy, not hardness."

Dave, looks like you just about 'nutshelled' the essence of the treble behavior of the Capri.
guidocorona
4,114 posts
 
All, I am now feeding the JRDG Capri a steady diet of 384V DC through the JRDG PC1 PFC unit with very intriguing initial results. I have just started a new didicated thread if anyone were interested. . .
http://forum.audiogon.com/cgi-bin/fr.pl?aamps&1208046462&openmine&zzGuidocorona&4&5#Guidocorona

Guido
guidocorona
4,114 posts
 
If anyone were interested in some of my latest a/b comparison between JRDG Capri and ARC Ref 3, see:

http://forum.audiogon.com/cgi-bin/fr.pl?aamps&1200110667&openmine&zzGuidocorona&4&5#Guidocorona

Please note that in the end, after several hundreds hrs of breakin, I do prefer Capri fed directly from AC through a Shunyata Anaconda Helix Alpha. . . sans PC1 that is. In my opinion PC1 should be used only for certain JRDG amps, and not on Capri pre.

Guido
More to discover