Should I upgrade DAC, speaker cables, ICs, or PCs?


I'm asking for your help in making up my mind of where to go next. I've asked this in the past and upgraded speakers first, later the amp, and lately preamp, and while the suggestions are never unanimous (nor should they be expected to be) they have been VERY helpful and I've been very happy with my upgrades.

Here's my current system:
- Rotel RCD1072 preamp
- Lamm LL2 pre
- McIntosh MC275 IV amp
- B&W 804S speakers
- dedicated power lines, and hospital grade outlets
- stock power cords throughout
- Nordost IC, the cheapest flatline ones (maybe Black Nights? not sold anymore)
- heavy gauge magnet wire for bi-wired speaker cables, an attemp to replicate Anti Cables
- room treatments: 2 16" dia DIY tube traps plus some panels.

Room treatment has brought great improvements and I'm still working on it with significant time spent there.

The weak ares to me are PCs, ICs, speaker cables and CD player, yet I don't have a budget to upgrade all of them in the near future. Maybe I can spend $1500, and used stuff is fine.

I know I'll be keeping the speakers and amp and pre for a good while, so upgrading speaker cables and pre to amp IC would be safe moves. On the other hand, if something is lost from the signal upstream, then it cannot be recovered, making the case for starting upstream...

I'm looking for opinions from more experienced "upgraders" who have gone through more iterations and have a better handle on how big an impact one or another upgrade MIGHT have. What would be the best next move, in your opinion?

Thank you!!
lewinskih01
I second the nomination of source. I gather your CDP is a Rotel? (You list it as a pre.) I've not listened to the Rotel seriously, but I'm betting it could be bested by 1500, especially with a used unit. A lot of well-regarded DACs could be had for that money (or considerably less) new or used; thinking strategically, that's the way I would go, since having the option to move to computer audio is a good idea. Thinking a bit further strategically, if you spend the 1500 on a source, you may very well come across used (or even new) wires down the road that would represent an upgrade for a few hundred bucks (esp. if the runs are short); and it might be easier to justify dumping that kind of money into the hobby here and there than another 1500. Good luck, John
for $1500 you could get a great DAC. You can take your time and go through several until you find the one that matches your gear the best.

With your pre/amp/speaker combo (should have an awesome warm,powerful sound) I would suggest either the Bel Canto DAC3 or the Benchmark. Although, there are a bunch of guys on here that have the Wyred4Sound that came out recently, and they love it, you may want to try that, I believe w4s has a 30 trial period.

Good luck.
I agreed with Jdoris. DAC with USB is a preferable option. It will be better if DAC will have balance output. In general Balance outputs are less sensitive to cable quality even if the receiving end is RCA.
Alex
I never really liked my Nordost Blue Heaven, they were a bit closed in and did not flow with the music. I would consider shopping around a bit and try different cables (if you have not done so already).

fwiw I recently tried the White Lightning cables talked about here in a 6Moons review: http://www.6moons.com/audioreviews/whitelightning/moonshine.html

It is a very good speaker wire that I paid $7 for. I never thought DIY could be so good but it really is.

Or you could try the Audioquest mentioned by several on AA:
http://www.audioadvisor.com/prodinfo.asp?number=AQT4B

I am not trying to rock the boat and think the DAC ideas are the next thing I would do as well.

good luck

I think it's time to begin borrowing cables from the Cable Co. and begin tuning your system... actually, enabling & refining your system.

Wires do matter. They ain't much fun and they seem like such a non player, but WIRES DO MATTER.... A LOT. If you want to see what your components are truly capable of.

Especially power cords.

Putting something like a Voodoo Black Dragon, Tsunami, Mongoose, Airsine, etc., on the CDP, and perhaps a Taipan helix Alpha on the Mac amp, should allow for some sort of DAC to be added as well if indeed $1500 is on tap for disposal. Lavry, Apogee, BC, all should help.

It is time though to investigate the cabling in your system. Power cords are more a foundation principle IMHO. I try to begin there first as a rule of thumb when I add or swap out a device… my next step is to add – replace it’s PC.

Blue Heaven ICs aren't bad ICs... Very spacious sounding, but that's about it. Put a pr of Cardas Neutral Refs in there as your main ICs and you'll hear every change up or down stream... better. The NR cables are IMO cables everyone should have on hand somewhere if not in the system, then certainly available. They're the pretty much, 'next ' step up from the BH's. More natural, more refined top end, and better mids. Nicer looking too.

Personally I’d get rid of those speaker cables “toot suite”, but that’s just me… then make other moves, like PCs, ICs, &/or DACs.

I know you’re going to do as you want… everyone does and many have their minds made up going into posts like this. They’re usually just seeking validation or support for their own ideas.

Of course as things are a DAC is the one item that’ll turn your head now. It’ll make a very big difference, if you keep your CDP.

Cabling however, and especially power cords first will enable what you have to perform better, hence SOUND better.

But trust me on this.. owning $12K of components or more, and using $200 - $400 worth of cabling is doing yourself an injustice. Plain and simple. Notwithstanding, the camp against upscale wires. …and why I said to ‘borrow’ some first, or do the Agon shuffle and try out some of the more popular wires and resell them if not well pleased.

PCs for the front end, and amp, plus a DAC can be had for $1500. A set of Audio art speaker cables for instance might could be added in there too. Thereafter… your main IC is a key to your system.

You wouldn’t run a Viper on skinny recaps and regular gas now, would you? How is this scenario any different?