2. analog
  3. 1248727142

SME V vs 309 Sonic Differences

Hi all,

I've read from a few sources one or two line comments like "The SME 309 gives up surprisingly little" when compared to the SME V. I've also seen a comment "most of the difference is in the tonearm cable." But in trying to nail down the true performance difference I have done numerous searches on both google and AudiogoN and can't seem to come up with anything beyond these one-liners.

Does anyone have experience with both arms that can give some insight? I just committed to an SME 309 and am wondering what it sonically gives up. Based on what it gives up, I'm wondering if the SME V would ever make sense as an upgrade, and what upgrade path exists for the 309 itself as either general improvements or targeted changes to specifically narrow the gap with the V. Any personal experiences with any possible upgrades is also welcome.

(Also, on a side note - I've heard some say the SMEs can be dark or too analytical. Is there any truth to that?)

Thanks everyone!
Greg
gsoravil
gsoravil OP
8 posts
 
Wow, that's a bit bigger of a praise for the Jubilee than I expected to see. So I take it the 309 handled the Jubilee reasonably well?

You know my eyes are bigger than my stomach when I silently ask myself "Would it be murder to stick a Winfeld on a 309?" I just don't think Winfeld + V is going to happen anytime in my forseable future. Might have to "settle" on a Jubilee + V on my eventual upgrades down the road. Oh this addicting hobby! I can already tell my next upgrade is me building my own table.
axelwahl
788 posts
 
Gsoravil
now just to throw the spanner into the gears.

I'm listening to an NOS ~ 150$ "Ortofon M20FL super" MI (moving iron) on my V arm and it give the Jubilee a run for the money!! Big time. In fact it sound better than a Kontrapunkt-B in my rig.

So, if you do NOT have to impress the neighbours and some such, save the cart money and get a top MM or MI cart. 4k$ saved for that Windfeld practically pays for your V arm, never mind trading the 309.
Greetings,
jeff1225
147 posts
 
I have experienced great synergy with the SME IV, Hovland Music Groove 2 and the Shelter 5000. This set up (on a Transrotor Fat Bob) gives me all I could ever hope to achieve: bottom weight, detail and sound stage.

I've seen SME IV's for $1500 - $2000 on the Gon.
axelwahl
788 posts
 
Jeff...
there is SMR IV and then there is SME IV.vi.
The latter ONLY available in US (for Sumiko), but as mentioned earlier, the IV.vi. is a stripped down V i.e. minus the damping trough.
The 'normal' IV is (silver not black) but uses copper arm wire and bearings one grade or so down from a V or IV.vi.

So there is a difference, and it WILL reflect in the price I should think.
Axel
jfrech's avatar
jfrech
1,816 posts
 
Hi, I would not call the IV.Vi a "stripped down" V (and the IV.Vi has the damping trough)

The only differnce between the IV.Vi and V is the internal arm cabling. IV.Vi using magnan copper ribbon vs the V's van den hul silver. Some (like me) prefer the magnan. the other differnce is the IV.Vi uses a static vs dynamic balance. Theory here being one less thing to resonate. Not sure if there is "better" here...more different I suspect.

So the IV.Vi and V are really variants on the same arm.
More to discover