SP10 Mk II vs Mk III

Just wanted to say that my SP10MKII is up and running, Thanks to my friend Jean for drilling my armboard (and making the plinth!) The Fidelity Research FR64S with a new SPU Classic GM E MKII is a nice combo on this set-up. My FR64S also has the B60 VTA adjuster , very nice. I will update the photos for my system as they are very out of date.
Albert, interesting point about the strobe and noise, I may just leave it disabled! But I do want to get a Tech to update the caps, Thanks all, and sorry for Hijacking this thread, Just seemed like a great place to ask some SP10 questions,
John T

Strobe adding noise? Wish I understood more about electronics to judge if this is likely.

KAB offers a strobe disabler switch for the 1200 series tables. In response to my questions on this idea for the SP-10 series, friends with electronics knowledge scoff at the idea saying it is such an overbuilt and sophisticated design that disabling or switching out the strobe would not have a sonic impact.

So, anyone here who has actual experience with this mod to share with the rest of us?

Lewm

Albert, Assuming I ever could find a Mk III, does it too have an oiled bearing, and does it require a shipping bracket for transport?

There is no ship bracket but the platter must be removed before transport. Oil goes in the spindle at the top edge. There is no easy "marked" oil hole like on the MK2.

If you go to Sound Fountain:

http://www.soundfountain.com/amb/sp10page.html and scroll down about half way, there is a photo showing where oil goes on a SL1810. The SP10 MK3 is the same place.

Before anyone asks, I choose Mobil One 5-30 for both my Technics. Mobil One is synthetic, so it will mix with whatever was there before (if any) and no issues with gunking up.

Thanks, Albert. As far as I am concerned, this could become a miscellaneous SP10 thread, in which any relevant info to the care, feeding, and resuscitation of these great tables could be discussed. So no worries about hijacking.

OK Lewm,
I need 2 screws for an SP10 Platter. Does anyone know where to source some or alternatives??

Here is my new SP10 MKII, in a 80 lbs plinth, black ash veneer, simple. It sounds very good but the cartridge is brand new so it will get better. But I'm excited about this TT, I'm using a cheap Lentek Step-up (battery operated - made in the UK in the 80's) into my Audio Research SP16 phono section. I'll be looking for a suitable /affordable Step-up for the SPU if anyone has a suggestion!

SP10--FR64S--SPU