Stylus replacement for Shure V-15 v MR

I miss my V15 Type III

I thought it might be of some interest to point out the mechanical/electrical differences between the V15V MR versus the V15VxMR. Apart from the fact that the V15VxMR and stylus assy were mfr'd in Mexico. Then look at the V15V versus the V15VMR in the same way. "MR", what does that moniker indicate?

When looking at replacement stylii through the Jico catalog it is noted that the V15VxMR and V15VMR stylus assemblies are not interchangeable.

I also note that the Jico catalog does list a replacement stylus assembly for both types. their assembly uses a cantilever made from an aluminum sleeve that holds a solid boron cantilever with a line contact diamond stylus.

It must have been circa 2000 when I purchased my V15VxMR new from an online retailer. Then a few years later I was able to get a replacement stylus assembly directly from Shure for the same cartridge. (Vn5xMR) This was before their remaining stock became exausted.

At the moment I've been comparing this cartridge versus an ADC XLM II improved, with both being mounted to an Infinity Black Widow tonearm (with graphite arm tube). Either one seems to behave well on this arm.

I bring this up in hopes that someone else has some experience/knowledge they might add on the subject of the V15V models.

-Steve

I just recently got a V15 type 11 supertrack off a TT I bought.I was rather surprised it sounded better than I expected.Looks like original stylus.It seems lacking mid range punch but has very nice side extension and treble height,nice soundfield.I have it mounted on an old automatic TT but even so it compares well with my Signet AM50 I just put a new stylus on,on same table.

The Jico SAS takes the performance of the original VN5MR (US & Mexico) for the SHURE ULTRA 500 to a higher level. Furthermore, it does not change f.r nor balance, simply adds information in all frequencies. Another evidence that Japanese take very seriously High Fidelity, and for reasonable price when bought directly from Japan.

I bought Saunders replacement styli for both my Stanton 881S and Shure V15 IV and they are amazing. Highest quality by far!