sweet, euphonic, reasonably powerful tube amp?


I'm thinking about moving away from my ARC VT100 mkiii to something more euphonic, forgiving, and sweet-sounding...tubey, really. (The VT100 goes somewhat in that direction when using the 4-ohm tap, but it's still somewhat "dry". On the 8-ohm tap, it's way too bright for me.) I have a VTL ST150 that's sort of in that direction when in triode mode, but it's just a bit bright for my tastes, as well. I want soft, easy highs. I'm using Harbeth speakers--I have both the Compact 7's and the M30's. They are somewhat inefficient, and require some power, probably no less than 70 watts or thereabouts, give or take. I listen mostly to classical music, in a relatively small room (14x19), and usually at low volume, but sometimes I like to step it up and play some rock or push the volume with some orchestral stuff. Other requirements: vanishingly low distortion, reliability, and ease of repair.

(Basically what's happening is that I've done the hyper-revealing, detail thing, and now I want to get down to just listening to the music, so that it's less about slam, holographic imaging, and cymbals in the room with me, and more about just listening to the music--not that I don't like a certain amount of those things!)

My budget, on the used market, could be anywhere between $3000 - 5000. On the pre-amp side, I have a GNSC-modified ARC SP8, a BAT VK31 w/ bugle boys, and I just bought a second hand Mac 2200, which I'm trying out because I want--Yes, believe it or not--a tone control!

(I really am whimping out, I guess!)

Thanks.
eweedhome
I'm fairly familiar with the VT100s and ARC amps generally - few are sweet and euphonic. Besides sounding great, there is unlikely a more reliable tube amp the QS, they are very, very easy to bias, and they are quite attractive; which counts a little bit. If you want really sweet and euphonic, you might also want to consider some of the older Conrad-Johnson gear using EL34s.
What 6550's are your using in to VT-100? Some are brighter than others. have you tried lowering the bias slightly? That will also take a bit of edge off. If the amp were either the MK I or II, I'd suggest rolling the 6922's into a Mullard or Brimar to provide the euphonics and glaze you prefer. That 6H30 is your thorn right now! have you tried a Mullard or Brimar 12AT7 driver in that excellent VTL amp? That might give you just the right amount of warmth/sweetness in the midrange to make you happy. (http://www.upscaleaudio.com/product.asp?itemid=31&catid=45) (http://www.tubemonger.com/12AT7_ECC81_E81CC_ECC801S_6201_s/8.htm) You might give a pair of those a shot before spending a bunch on another amp. Too bad there aren't more options for the 6350.
Rodman - My VT100 is a mkiii, so I'm stuck with the 6H30. I'm reluctant to roll NOS tubes in an amp. Tube problems with an amp can be a bit more dramatic than with a pre-amp.

Pubul57 - Thanks for the thought about the CJ's. I had an MV75a 25 years ago, then tried a Premier 4 and thought it was too bright. Haven't tried anything since. I gather that EL34 tubes can generally be softer and more laid back? What CJ's do you recommend?

Thanks
Funny- I've been rolling NOS tubes in my amps for decades without one issue. Happy searching!