Von Schweikert VR-4,Jr.


Was anyone else as impressed by these speakers at HE 2004 as I was? I thought their performance was stupendous, and can only wonder what the bigger models sound like.
gladstone
Tvad,
Do you mean fromyour reply that the woofer wire is less critical than the tweeter wire, or that HD 12 or Canare would be fine for both?.

I currently have a Blue Heaven single wire, as well as a set of inexpensive Rapport wires that I'm trying as a biwire. I'd forgotten Gamut's biwire capability , and VSA recommends a shotgun system as giving the best sound, leaving the link wire out. I will be trying that as soon as the speakers have some hours on them.

Carl
Yes, the woofer wire is less critical than the tweeter wire. I used Canare 4S11 for quite some time with excellent results. I wasn't bi-wiring. I was using jumpers. So, you're results should actually be even better.

A few months ago I replaced the Canare with MAS Signature Hybrid speaker wire.
I am just past the 100 hour mark and am very pleased. The bass has really tightened up and the midrange is really filling out. I am dialing in the placement (with my dealers help) and just added the lead shot. I anticipate putting the spikes on in the next week. I really love these speakers. I have a single pair of wires (Kimber 8TC going to the M/T unit and a pair of jumpers made from the same wire going from the M/T unit to the bass unit. Works great!
Jack is right.

You have a lot to look forward to. But save yourself the misery and break them in before trying to do too much. I spent way too much time on placement because they weren't broken in yet. So I really couldn't judge the best location by the sound.

Remember the 200+ hours mean "loud" music (don't let them clip). The owners manual has a procedure that helps keep the sound down by facing each other. It works.

Enjoy, you've made a great speaker choice, there's no arguing that.

Rob
I just heard these speakers a few weeks ago and was very impressed. Unfortunately I didn't have my normal auditioning CD's with me. I am strongly considering them.

I am a little concerned because the load is 6 ohms and I have an ARC tube amp.

One question I have is the "link" between the speakers. DOes that come with them or do you have to buy that if you don't want to bi-wire. Are the connectors special or are they RCA so you can jumper with a short pair of speaker wire.

Thanks.