2. analog
  3. 1116067442

VPI Scout Placement

I have been tinkering with my newly acquired VPI Scout and could use some advice... I have wood, carpeted floors and the slightest thump or walking across the room will send the stylus skipping. Unfortunately wall mounting is not an option due to space restrictions and room configuration. I have a Sanus rack for my other gear and I am sure that needs to be upgraded but I like the idea of having the TT near my listening position. Presently the TT is on a heavy wood coffee table. Your expertise would be greatly appreciated by this newby.
flyfisher
flyfisher OP
46 posts
 
Gingko Cloud seems like a very simple design and easy to copy. I wonder what the difference between the balls they use and racquet balls might be??? The acrylic is not visually distracting IMHO.
I may convince the Mrs. to allow something like this into her 'decor'. Maybe a nice piece of Maple wood to boot?
sbrtoy
122 posts
 
I got some Isol-Pads for free when I purchased a CD player, I didn't like them under the CDP, but they work great under my Scout for reducing shock and resonance, and tightened up the sound overall. You could try these under the points and the motor on a piece of maple butcher block, I would think this would work well, and the Isol-Pads are cheap. The Gingko is great but much more expensive than this setup. Go to natdistribution.com to check them out.
dougdeacon
3,338 posts
 
My entire rack (400 lbs/8 feet) sits on eight sorbothane hemispheres I got from McMaster Carr or W.M. Berg. They cost about $6 apiece IIRC.

I put them on furniture coasters so as not to stain the carpet (Sorbothane can release oils).

In two years our TT has never skipped no matter who was walkin' or jumpin' around, despite our lively wood floor. Keeping the sorbothane away from direct contact with the TT helps minimize its otherwise terrible effects on dynamics.
flyfisher OP
46 posts
 
I have been playing with some suggestions offered by Greg Weaver in an article titled Synergizing on Sound stage com. I tried the sand in zip lock bags and the shelves with the bike tube and the sound seems clearer and instruments are easily defined IMHO but I still have to tread lightly. I will try the sorbathane and anything else that comes around. After all it is a hobby... Most of the fun is in the tinkering.
ozzy62's avatar
ozzy62
633 posts
 
www.machinadynamica.com

This is THE link for you. A Promethean Base situated as close as practical to the floor will be your best answer. Look at my system pics for one way it's done.

Oz
More to discover