2. analog
  3. 1234283795

VPI Scout "tweaks"

My analog rig consists of a Scout with JMW-9, Dynavector 10X5, SDS, Sutherland Ph3d, VPI turntable IC, and Gingko Cloud 9. I have the geometry set via MintLP. The rest of my system is comprised of Vandersteen 2Ce sigs, Rogue Magnum 66, Anthem MCA-20 and Audioquest Diamondback IC's and Bedrock speaker cables.
It sounds really good so my question is...are there any upgrades/tweaks that will make a definitive improvement, short of buying a new table? I have about $1k to spend. Thanks in advance.
Ag insider logo xs@2xkmulkey
stanwal's avatar
stanwal
3,147 posts
 
Apparently VPI is switching to an aluminum platter for the Scout. What difference this will make I have no idea.
srwooten's avatar
srwooten
694 posts
 
Add a used Shelter 501 II ($450-$525) and swap out the VPI IC's for something not so lifeless sounding. I like Harmonic Tech IC's. You could upgrade to the JMW 9 Sig arm too.
schipo
1,267 posts
 
Apparently VPI is switching to an aluminum platter for the Scout. What difference this will make I have no idea

I Have a feeling this is going to be an improvement over the clear acrylic platter?
srwooten's avatar
srwooten
694 posts
 
Schipo-
It is my understanding the switch is due to not being able to procure the high quality acrylic they need.
stanwal's avatar
stanwal
3,147 posts
 
I talked to Harry today and he said that current suppliers could only guarantee a 1/8 inch tolerance on a 2" sheet of acrylic, which might mean a 1/4" variation. I am using Van den Hul the First Ultimate metal screened ICs, they are a big step up from stock. Also try a power cord upgrade. I am using the Siltech that Spirit Sound was selling for $90 for 2 Ms.
More to discover