When does speaker distortion become audible?


I recently got some seas excel speakers and when I fired them up for the first time I thought to myself "wow, there's no distortion".

I find this interesting because I never really thought I was hearing any distortion from my previous speakers but maybe I was, and just didn't pick up on it until now.

Interesting side note, I think my personal speaker taste is moving towards less analytical, super detailed sound to a more musical, tone based preference (I think I'm becoming less tone deaf, lol).
128x128b_limo
About 10-20% becomes noticeable to most listeners. But for some rock music it is 20%+. Listeners of small combo or solo jazz and classical can be upset by 5% "noise". I fall into latter group. Pristine quality is very appreciated. AC power conditioning is essential for fussy ears.
Bruce, the worst part of Studio/60 was aluminum dome tweeter. I did try to replace it with Morel Supreme 110 but at the end I failed - it is not as easy as it sounds. Tweeter in Hyperions HPS-938 is so well integrated that you cannot practically tell when sound goes thru it. Fantastic highs with zero sibilants.

Ptss, 10-20% might be noticeable to most but it is also related to frequency. Bass distortions are not as audible as midrange distortions. People often select an amp with 0.01% distortion not realizing that it is most likely due to deep negative feedback at the expense of the sound, while speaker distortions go in many percents.
Kijanki, I recall reading that folks who owned the Signature 8s (v1) also complained about the so-called "Go-Pal" tweeter being harsh, hot and fatiguing. The Go-Pal used some type of gold/aluminum dome. The later version of the S8s (v2 and v3) use a beryllium dome tweeter, which is a very different beast. Much of the HF ringing was eliminated because the beryllium dome's HF resonant point is much higher than its Go-Pal predesessor.

Btw, the Home Theater HiFi link I provided to you above is to the bench test report of the S8 (v2). The test results are notable because the S8's measured distortion is less than 1 percent over most of the measured frequency response spectrum -- while the speaker is pushed to 100db of SPL. I don't know how that converts into input wattage, but does it mnatter?? Sustained listening at 100 db will rupture the organs in small animals and damage one's hearing.

BIF
At 20 Hz it was over 5% but according to this article:
http://www.bksv.com/doc/BO0385.pdf
it is harder to hear distortions below 400Hz. Single tone shows only THD but there are other distortions that might be more audible. Intermodulation, caused by nonlinear motion and membrane bending, produces new frequencies when speaker is driven by two frequencies.

According to this article: http://publications.lib.chalmers.se/records/fulltext/126969.pdf
THD testing does not reveal all nonlinearities of the speaker. Harmonic distortion will alter instruments' overtones adding coloration while intermodulation distortion will be much more audible.
Kijanki,... I started reading the article. It's fascinating. It looks like it really speaks to a fallacy in cold reading bench test reports in general and those relating to speakers in particular. Namely, the bench tests may be testing stats that are not terribly important, and not testing stats that may be important. Ergo, why live auditioning is so important.