Room/wall treatments for new basement?


I have the opportunity to add room treatments to new walls being constructed in my basement (can go between studs both on walls and ceiling). Walls are obviously concrete with the framing & drywall coming out ~ 8 inches. Also any recommendations on dampening to go around an air duct on the ceiling --also ceiling dampening recommendations (standard 8 footers)? Want to do it right but reasonably economical. The concrete walls are the biggest concern. Any help would be greatly appreciated! Does the standard "egg carton" accoustical foam work well in the walls?
jeffga
Interesting;
http://cgi.audiogon.com/cgi-bin/cl.pl?accstwek&1065291017&2&3&4&
I am in the process right now of finishing my basement. The reason for doing the following is to keep the music from traveling through the floors and ductwork. Also would hope it has some acoustical benefits in the listening area.
I don't have an issue with walls because I used styrofoam building blocks as the frame for the poured concrete. I am taking a lot of time though with insulating the ceiling and around the duct work. After building a frame around duct work I put in 3-6 inches of insulation, depending upon the area available. I am then going to place 6 inches of insulation between the floor joists, being sure to overlap it with the insulation going up the sides of the duct work. The insulation will be flush with the bottom of the joists.
Before the drywall goes up the duct work and ceiling will be cover with soundboard (fiberboard). This should be a better solution than 2 layers of drywall. Also feel that the soundboard with isolate the drywall from the joists to possibly reduce resonance.
This may not be the best thing to do, but I felt it was a reasonable thing to try. Doing the work myself so I don't have to listen to a builder saying I'm crazy. Well, maybe I am, have to wait and see.
Good Luck
I would consult with the people at www.echobusters.com. The echo busters people supply materials to the professional trade not just to home audio. They will be happy to consult in your project. Give them a call

Good luck
Many of us have written extensive threads here and I would suggest doing a search. You will find a wealth of opinions.
Jeff: Drywall standard construction turns out to be excellent. If the room dimensions are right then you can do a 2 or 3 layer buildup. If not, you are actually going to want to lose some bass energy, so stick to single layer in that case. As to the "egg crate" foam. Most of that is very low density and not as good as the higher density Sonex, or even better is Owens Corning 703 fiber board wrapped in fabric.

You might want to get a book on Acoustics--Alton Everest Master Handbook of Acoustics is a good start. Our website and in particular, the listening room may prove to be helpful. The simulator there is also pretty fun when modelling a room.