Best tonearm for London Reference Cartridge


Hi,
i have a Decca London Reference Cartridge (LRC), actually mounted in an older Mission Mechanic tonearm and would like to ask you with which tonearm one can get the most out of this wonderful cartridge.
The player is a Kuzma Stabi Reference and a Thorens TD 124, other arms i use are Sumiko MDC 800, Shindo Meursault and old Decca for ffss cartridges, but in these i haven´t tried it yet, but all these tonearm run with other cartridges so fantastic, that i don´t want to change them.
Some people recommend the long VPI 12.5, 12.6 or 12.7 tonearms. Have you some other suggestions?
Thanks very much!
breezer
When I bought my Decca Super Gold Mk.VII, the distributor/seller (Warren Gregoire) was adamant that these carts needed to be mounted on damped unipivot arms. My VPI JMW 10.5 met this requirement. Very impressive sound, but I could never get rid of the hum no matter what I tried. Not a loud hum, but definitely there.
The Sumiko may well work with your Decca--try it. The damped unipivot arms (think Graham for example) are sure bets for Deccas, as Dopogue reports, but other designs can work too. One such was the Sugden Connoisseur arm, perhaps oddly enough because it was not a very high-spec'd device.
If you are open to something different you might contact Vic at Trans-Fi. He mentioned to me that the London Reference is his favorite cartridge on Terminator Pro. To eliminate hum problems with this cartridge he developed a screened 4N silver IC that runs uninterrupted from cartridge to phono stage.