2. analog
  3. 1098663893

the table or the arm first?

Experts:

What is more important if one needs to choose between an excelent table with an standard arm, or a fine table with an excelent arm/cart?

I am asking this because I am standing in that position now, with the opportunity to buy an excellent table nut no money left to get more than an RB300, or upgrading my VPI HWMkIV and fit a serious arm like a Morch or SME.

You advise and guidance will be very valuable.

Fernando
128x128flg2001
flg2001's avatar
flg2001 OP
543 posts
 
Thanks everyone for your feedback, looks like the RB300 is quite a good piece of gear for me to think of something else in the short term, maybe a safe route would be to upgrade the VPI with a SAMA and-or SDI, bring-in a solid plattform on top of my Boltz rack (Nuance?) and live happy.

I´ll let you know the results.

Fernando
the_smokester
174 posts
 
Flg2001,
I slightly misread your post. The RB300 is a good arm. I had one on a Rega P3 and was quite satisfied although the Koetsu Black cartridge I was using didn't hurt, either.

What table are you contemplating buying?
flg2001's avatar
flg2001 OP
543 posts
 
I was thinking on an Avid Volvere, Notingham Spacedeck or Acoustic Solid.
cousinbillyl
161 posts
 
The more expensive the arm, the better it sounds. But why?
If we look at Rega arms, the big difference is in the bearings. They test hundreds of bearings. One out of a hundred is perfect. This goes into their expensive arms.
stringreen's avatar
stringreen
5,112 posts
 
What's first....steering wheel or brakes?
More to discover