2 Center Speakers in M-C/HT System?

I have soliloquy sat-5's all around with a velodyne ULD15 II for a sub. I could not fit the soliloquy center channel where I needed it and went with a pair of sat-5's instead. I laid the sat-5's on their sides about 6 inches apart with the bottoms together. I also made sure that the amps for both are itentical as well as the cabling to avoid any cancellation. The system sounds great! It also fills the center better since I have a 6 foot front projection tv and the R/L speakers are about 16 feet apart.

Elevick, thanks for the response. This is exactly what I wanted to achieve but need to confirm with someone who has done it. So, according to your description, the tweeters for your center speakers are facing outward (to the outside). Right?

Keep them as close together as possible and it will work fine. My multichannel processor has two outputs for the center signal precisely for this situation.

Eldartford, what pre/pro do you have and are you positioning your center speakers so the tweeters are closer together?
Thanks.

Gaudio_eek...My pre/pro is a Rotel RSP-1066. I do not actually use two center speakers since my system is just for music and there is no screen to get in the way. However, two speakers on each side of the screen, and playing the same signal will image at the center of the screen...really better than you could do with a single speaker above or below.