Lightspeed Attenuator - Best Preamp Ever?


The question is a bit rhetorical. No preamp is the best ever, and much depends on system context. I am starting this thread beacuase there is a lot of info on this preamp in a Music First Audio Passive...thread, an Slagle AVC Modules...thread and wanted to be sure that information on this amazing product did not get lost in those threads.

I suspect that many folks may give this preamp a try at $450, direct from Australia, so I thought it would be good for current owners and future owners to have a place to describe their experience with this preamp.

It is a passive preamp that uses light LEDs, rather than mechanical contacts, to alter resistance and thereby attenuation of the source signal. It has been extremely hot in the DIY community, since the maker of this preamp provided gernerously provided information on how to make one. The trick is that while there are few parts, getting it done right, the matching of the parts is time consuming and tricky, and to boot, most of use would solder our fingers together if we tried. At $450, don't bother. It is cased in a small chassis that is fully shielded alloy, it gets it's RF sink earth via the interconnects. Vibration doesn't come into it as there is nothing to get vibrated as it's passive, even the active led's are immune as they are gas element, no filaments. The feet I attach are soft silicon/sorbethane compound anyway just in case.

This is not audio jewelry with bling, but solidly made and there is little room (if any) for audionervosa or tweaking.

So is this the best preamp ever? It might be if you have a single source (though you could use a switch box), your source is 2v or higher, your IC from pre-amp to amp is less than 2m to keep capaitance low, your amp is 5kohm input or higher (most any tube amp), and your amp is relatively sensitive (1v input sensitivity or lower v would be just right). In other words, within a passive friendly system (you do have to give this some thought), this is the finest passive preamp I have ever heard, and I have has many ranging form resistor-based to TVCs and AVCs.

In my system, with my equipment, I think it is the best I have heard passive or active, but I lean towards prefering preamp neutrality and transparency, without loosing musicality, dynamics, or the handling of low bass and highs.

If you own one, what are your impressions versus anything you have heard?

Is it the best ever? I suspect for some it may be, and to say that for a $450 product makes it stupidgood.
pubul57
Dual L&R volume controls are the only option I provide for the Lightspeed Attenuator.
It is the only one that does not effect the sound quality, though as you can imagine it is slightly more difficult to use, but a boon to those who have unsymetrical systems or room acoustics.

Cheers George
Next generation LSA or another opportunist copycat?

Neither. The designs are more different than the same. Not even an evolution IMO.

All the research I've done says users who've had both prefer the Warspeed and that this one is pretty much the best of the bunch. Curious to hear why as well, though.

Everyone is entitled to an opinion. I have both units and can say the LSA is clearly the purist and smoothest sounding of the two. My reason for buying the Warpspeed is that the builder makes a balanced version which I wanted to try with my Otari reel to reel. It does the job, but it's not the final answer for me in this application.
Agear, seems like your have you answer. The "latest" is syrup thrown on the original and the greatest. But if you still have issues, buy both and decide for yourself; the LSA is still the gold standard, even though it might not be the "latest" -- hard to improve upon perfection. If you personally find something better, do let us know, but you are up against a tough audience of folks who enjoy the LSA. Have you actually used it? Doesn't seem like it.
Does the LS improve with the battery option? Curious what you folks have found? Not sure why it would, but thought I would ask.