2. tech-talk
  3. 1163632772

Behringer DEQ2496: Connection Options

I am eagerly awaiting delivery of a DEQ2496. Not being a sound engineer, I have some trepidation about the learning curve. For starters, though, I want to make sure I have the optimal connection configuration. The options seem to be (1) connect to pre-amp in an aux loop (e.g., as a tape deck) or (2) connect between pre- and amp. From what i can tell, the better restults are obtained with the latter configuration -- i.e., place the DEQ between the pre- and the amp with balanced connections going in the same direction as the existing connections. Is that right?

Also, will "standard" XLR ICs work with the DEQ or must I get special ICs/adaptors.

Thanks for any help.
jeffreybowman2k
cwlondon
1,198 posts
 
It seems I was on the right track, and I somehow got everything working shortly after posting my question above.

This EQ still amazes me with its complexity, so any additional hints greatly appreciated.

Has anyone ever figured out the factory reset?

Thank you,
rodman99999
3,557 posts
 
Mr. J- If you are intent on placing the Behringer in your signal path: At least buy some Mogami 'Gold Neglex' cabling(if not something better/audio specific). You mentioned "standard XLRs", so- I'm assuming you plan to run balanced. (http://www.musiciansfriend.com/navigation?q=mogami&st=) These cables' four conductors and tightly wound shields are of oxygen free copper, it's insulation is XLPE(cross-linked polyethylene), and the Neutrix XLRs have gold plated pins. They also make an AES/EBU cable should you decide to run your digital signal through it. Great cables in the studio or live venue and: Lifetime warranty.
tvad
9,467 posts
 
I agree with the high recommendation of Mogami Gold Neglex. Inexpensive, high performance cable. Doesn't get the recognition it deserves.
More to discover