2. pc-audio
  3. 1245425997

analog to digital

I have two systems, both of which run off my iMac (through Perpetual Technologies DAC, BAT preamp and Odyssey amp in one room and wirelessly with Apple TV, Cullen modified PS Audio DAC and BAT integrated in the other room). Snell Type A and Type IIIA speakers. I like the convenience of it, but also have an ESL-1 turntable with TT copper mat and ring and clamp that I continue to buy records for. I would like to be able to transfer music from my record collection to the iMac and keep as much as possible of the vinyl quality (I know it won't be the same, but I still want the music in the second system). There is an old (2006) thread on this, but I wondered what is the current best buy in analog to digital converters which would allow me to transfer the music from the turntable to the iMac and then wirelessly to the Apple TV, DAC, BAT, etc. Any suggestions?
128x128twilightround
herman
1,974 posts
 
Budget? I plug my turntable directly into the mic inputs of my RME Fireface 400 for A-D and use Pure Vinyl software for RIAA EQ and volume control with my Mac Mini to playback vinyl. The RME is about $1,400 new and usually available used on eBay. Of course you can spend much, much more on the A-D converter. The software is a few hundred dollars and eliminates the need for a phono pre. The RME is connected via firewire so after it converts A-D it gets processed by the software in the Mac at 64 bits and gets fed back to the RME for D-A. It will do up to 24 bit 192KHz so the quality is very good.

http://www.channld.com/pure-vinyl.html
almarg's avatar
Ag insider logo xs@2x
almarg
8,673 posts
 
If $1875 is within reason, you might also want to consider the Sound Devices 702. Their products are VERY highly regarded in professional sound recording applications. B&H, an excellent dealer, offers it for that price.

It accepts both mic level and line-level inputs, balanced or unbalanced. If you have a phono stage in one of your BAT units, or separately, which provides accessable line-level outputs, you could use the 702's line-level inputs. If not, you could go into the mic inputs (which I understand are extremely low noise), and do the RIAA equalization in software, as Herman describes.

The digitized signal is recorded to a Compact Flash card, which can be read either from the 702's firewire port, or by placing the card in an external card-reader.

HTH,
-- Al
almarg's avatar
Ag insider logo xs@2x
almarg
8,673 posts
 
Of course if you feed the cartridge outputs into mic-level inputs, you need to make sure that the cartridge sees a proper load. The Sound Devices 702's mic-level input impedance is 7.5K; I don't know about the RME unit. If the cartridge is a moving magnet type which wants to see 47K, that may be a problem. For a moving coil cartridge, the 7.5K could be reduced if need be by connecting an external resistor.

-- Al
More to discover