Search for “signal ground solutions”

Filter by specific user

Found 111 results

 Carver A-500X picks up stray radio stations
Hi, My carver A-500X amp picks up stray radio signals...The amp itself does not seem to have ...
 I had the same problem and solved using MAGIC ground...But when I switched to a HD signal the b...
 My solution is as above--float the ground pin with...outlet centerscrew) on the chassis (with a...
 The ideal solution for this application is the Photon...about 12" of interconnect and since the audio ...
 Ground Loop Hum
covered within the forums that it's worth it to give a solution...I knew from the buzz that i...
 is fed from the Shunyata boxes, whereas the Entreq grounding...works in parallel with the system, ie it's not in the
 Check the ground between your tt and preamp....The signal seems to be from the platter from wha...
 plug is fine for isolating the component causing the ground...remember that the cheater plug is defeating the safety
 The solution of connecting all your chasses and having...the place to look would be the connection between
 One amp had signal ground connected to the chassis...electronics guy has been doing which gave ...
 , you are connecting the signal ground of both subs...not have significant voltage offset betwe...
 in SQ investigating first balanced power, and now grounding...So I need all the solutions to co...
 ground and no more hum....This is caused by the fact that some part of the signal...the chassis...
 I agree with the previous posts about less costly solutions...as $8, but there could also be trade-offs with the
 Eldartford - that makes sense for signal grounds...but not for AC groun...
 Two questions about balanced operation ...
have a water pipe that would be sufficient to run a ground...Thus, the system is not grounded...
 The signal is most likely coming through the air as...One simple and effective solution is to a...
 Tim, a ground loop is a situation in which...one system get plugged into electrical outlets with groun...
 I found the problems, and here are the solutions...(for the record):- My system had a ground is...
 Why everybody is wasting time offering implausable solutions...it turned out to be improperly routed intrachassis