aoliviero
Responses from aoliviero
| Acoustic Signature Thunder I used to use the Mambo. The precursor to thunder . It was an amazing TT. I strongly recommend the thunder abs suggest one motor. | |
| Graham Phantom Supreme? My experience with damping fluid is the following:Use very little. I initially tried ~0.25cc of the series 100 fluid. I then removed about a little more than half of it leaving the fluid touching the underside of the square shank and ~1/3 of the w... | |
| Graham Phantom Supreme? Wrm57,I agree I felt the Phantom II was better than the triplanar. You will be shocked by the Supreme. The new version has a very live attack without sounding threadbare or strident. The triplanar is a little fuller but is missing a lot in compari... | |
| Graham Phantom Supreme? Hi All,I had my Phantom II upgraded to the Supreme status a while back and finally had a chance to install it. Some comments:1) this arm has incredible macro and micro dynamics. It's is one of the first things that stands out. Dynamics start conti... | |
| Brinkmann vs TW Acustic I agree with Syntax that the way to perceive speed instabilities is to hear for low level sounds and ambience. Speed stable tables have better air, ambience, soundstage depth, clarity, dynamics and more defined bass. Atmasphere has said similar th... | |
| Brinkmann vs TW Acustic DownunderI'm not at home right now to double-check but I referred to slower based on the 33 mark moving in the direction the "slower-arrow" is pointing to on the strobe-remote-gadget . I thought this designates slower speed because I recall having... | |
| Brinkmann vs TW Acustic Hello DownunderIn my case, with one motor, the speed slows down ( as observed by the 33 mark moving to the left of the strobe disk) when the needle is in the groove. Are you using more than one motor?Andrew | |
| Brinkmann vs TW Acustic I own a TW Acustic Raven AC-1 and would like to make a few comments:1) The table needs to have its speed set with the needle in the grove. I believe this has to do with the fact that it uses a DC motor. My understanding is that the speed is relate... | |
| High Fidelity Cables CT-1designed by Rick Schultz Thanks JA. Why would one want an unshielded phono cable?Andrew | |
| High Fidelity Cables CT-1designed by Rick Schultz Has anyone tried the phono cables? If so which version and how did they compare to your current cables?Andrew | |
| Evolution Acoustics MMMicroOne I agree with Dinder1. The MMM-1 is better than the LS50. The LS50 is nice, but does not have the lows the MMM-1 has and it also sounds "boxey". the LS50 would make a great bookshlef speaker in a nearfield situation like at your desk.Andrew | |
| Evolution Acoustics MMMicroOne Glory,I heard the Magico V2 a very long time ago. I was impressed at the time. I think this is the sweet-spot in their line and I'm not a big fan of the aluminum-enclosure speakers even though they get a lot of good press. I have heard systems at ... | |
| Evolution Acoustics MMMicroOne Hello folks,I have been living with the MMMicro ones for a while now and can confidently say that it is a superb sounding speaker and excellent value. It has anazing timing, coherence, resolution, and dynamics. The tweeter on the unit is a tour de... | |
| Evolution Acoustics MMMicroOne All,I would like to set the record straight on a few things. Firstly, after re-reading my comments about Evolution Acoustics and Jonathan I have to admit that they were too harsh, very negative and accusatory beyond the line of professionalism. Fo... | |
| Evolution Acoustics MMMicroOne I definitely agree with Byroncunninghams 4 observations and comments. Im a recent owner of the MMMicroOne having taken delivery last week. I would add a 5th comment to his list. 5. Lack of transparency, lack of trustworthiness and deception dama... |