bigaud
Responses from bigaud
| Insane ground loop; anybody wanna try? These will give you more data:Try temporarily running a wire from the preamp case to amp case. This assumes both cases are connected to their respective ground paths.Could also be a problem with a cable or jack. Any oxidized jacks? Does every cabl... | |
| Dielectric grease on connection ends Update: Ox-gard and low voltage. I have a situation with a furnace where I need to prevent oxidation in contacts that see only a few tenths of a volt. I tested GB Ox-gard to see how much pressure it needed to conduct. Without pressure it wil... | |
| Insane ground loop; anybody wanna try? If this helps it will be less work.Before running Romex, I would open the outlet box, the closest electrically to the incoming power, and check all the connections. Then follow the lines to boxes going back to the panel, or coming from the panel,... | |
| Dielectric grease on connection ends As a long-time audiophile and a general building contractor, I have fixed lots of electrical problems and installed lots of electrical circuits. I thought I would share a few observations:1. 110 volts seems to cut right through oxidation, except i... |