danmar123
Responses from danmar123
| Advice on New Electrical Service D., I have the Oyaide R1, WARNING... Look for something else. When I unplug my amps, the face comes off with it. | |
| Advice on New Electrical Service D., I have the Oyaide R1, WARNING... Look for something else. When I unplug my amps, the face comes off with it. | |
| Advice on New Electrical Service That panel will work. Is it available, is the price the same as the Murry? Did you compare the price of the breakers? I went w/100amp subpanel, it came with all the breakers 12(thermo-mag.) for under $100.00. All copper. I'm using 1-20amp for my F... | |
| Hard Wireing? Hard wire update- Parts came in, had to run to the electrical warehouse for compression fitting drilled the hole to allow for the fitting, SCOTCH LOCKED, heat shrinked, put it all back, AND... Music is more defined & movies, well? I should let... | |
| Advice on New Electrical Service Hey Diwakarv, I just did my panel & used a Murray. There's no difference.Just go all out. Use thermo mag. breakers, clean ground bar & cyro treated romex w/cyro treated outlets. AMB Dan | |
| Hard Wireing? Thanks, All advised is taken.Waiting for parts to come in. To be continued. | |
| Hard Wireing? Zavato, I spoke first hand to the UNDERWRITER & your 100% correct. As in my goal for perfection, I ordered a strain relief (cable gland) & now searching for wire. Any suggestions will be much appreciated. | |
| Hard Wireing? Williewonka, I did a search for 14ga wire & came up empty. I'll have to go w/12ga which I'm sure will be fine. Should I ground the chassis of the receiver, or should I just let the ground float from the plug? AMB Dan M. | |
| How short should a power cable be for my amp? Thanks for your responses.It's that I'm trying to clean up the wires & the power cords of my amps, are to long. | |
| Hard Wireing? Thank you Gents. I am qualified to do all the work. i'm going to give it a try. I'll keep you informed. AMB Dan M. | |
| Hard Wireing? Just looking to improve the performance of the unit. | |
| Best lines in a song Led Zep: no one heard a single word you said, but you keep on talking to your dying day! | |
| parasound zDac owners - quick question Hello Lightspeed, I have the parasound 5250 amp. I had the same hum Fixed the problem w/HumX plug adapter. | |
| Center channel Thanks Internetmin, I'll have to play when my Maple comes in. I'll post my final outcome after I'm done & hope It will help fellow Members. AMB Dan M. | |
| Is it better to isolate the plinth or the amp? Thank you for your replies. Just ordered MapleShades Vibration 2 kit.I have an inclosed audio cabinet w/glass doors. I installed a roll out shelves made of mdf,I'm going to put a sheet of iso pad they sell for HVAC installs in between the mdf &... |