dunenthem
Responses from dunenthem
| intermitant phono tube cut out? I think the discussion in an audiocircle forum by Dan was pretty straight forward. However, as you suggest ,there may be a better way to skin the cat. How would the 12au7 negatively effect the sonics? enhancing or suppressing high frequency for in... | |
| intermitant phono tube cut out? My mistake Tls49, the tube in question is a cv4003 not cv4004 as I previously reported. I have it in the rear position of the unit which is designed to be a 12au7. The second position , normally a 12ax7 has an RCA cleartop(12au7)for toning down th... | |
| intermitant phono tube cut out? Sounds to me that I'm risking the preamp if it is this pin issue- the term "short" is a bit disconcerting. The cartridge i'm using is a homc glider so two 12au7s match my required gain better . My spare is an rca cleartop which when paired with a ... | |
| intermitant phono tube cut out? A couple of clarifications - the tube in question is used for both channels so channel swapping isn't in the cards. I did notice that one of the pins easily bends upon removal and just as easily goes back into place when reinserting. So it could e... | |
| Doge 8 and Conrad Johnson ET-3 So Rower, are telling me that even at 2.5mv,the phono stage would be too noisy? That would be a deal breaker for me.. I just picked up a used Mod LS-100 W/ PHONO which I was going to compare side by side with the Doge.Now I;m not so sure... What d... | |
| Doge 8 and Conrad Johnson ET-3 Rower30 - Great evaluation! I certainly get the flavor of where you put the Doge in your landscape. I would consider myself more mid-fi with my SS system looking to inject Tubes into my music/ HT. combo.(MA- sr6, Para p7/a52, oppo 83se,vpi classic... | |
| Doge 8 and Conrad Johnson ET-3 Rower - any update on the Doge ? |