falmgren
Responses from falmgren
| Empire Turntable Parts Thanks for all the feedback. I got the LEDs from Parts Express. Installed and bingo, works just fine. Added a Parasound JC Junior and just listening to it. Good so far. Nice to bring my Empire back to life. I also would like to understand where th... | |
| Empire Turntable Parts Thanks Atmasphere | |
| Empire Turntable Parts Does anyone have a recommendation for grease to use on the solenoid for tonearm damning. I cleaned mine and used a synthetic oil, but it drops too fast. Recommendations appreciated | |
| Empire Turntable Parts I just went out to a site called Tapehead and they had pictures of the LEDs and documented. I think Empire had different versions of the control board for the model. I must have one of the later models which also includes a cueing Pot. There was p... | |
| Empire Turntable Parts The schematic I have from the manual shows a LED and documented in the manual. Why would they put that in the schematic? Thanks | |
| Empire Turntable Parts Hello all, I took advice and cleaned up contacts and roughed up LED. The are not bayonet lamps, bit an Red Led. I must have put the wrong lamp back in the down cue. I now thin the LED is bad because swapping again identified a bad LED. I will try ... | |
| Empire Turntable Parts I moved the one not working tot he slot that was and it did light | |
| Empire Turntable Parts I swapped the lamps and it didn’t fix. There is something wrong in the circuit. | |
| Empire Turntable Parts Thanks. I will take the bottom module out and see if it is a lamp. | |
| Empire Turntable Parts Thanks. Is Hana the brand of cartridge | |
| Classe Sigma SSP Owners I would do it yourself. I bought an XTZ room analyzer Pro that you use your PC to test. The kit includes all you need and you download the software. It will give you PEQ recommendations. Once you play with it for a bit you will get it tuned in. | |
| Classe SSP-800 - Time to move on? I have a Classe CT-SSP AND CA5300 with B&W 803D2s/SVS sub. I just added a OPPO-203 and connected it to LG Oled HDMI port 2 and use audio only out to SSP. I get awesome 4K video and superb sound of my 5.1 processing. I also used a XTZ Pro to t... |