Broken Xindax SCD-2


Hi have a Xindak here that I am trying to fix, but it seems there is something mechanically wrong with the transport mechanism.
Anyone know where I can get a replacement transport or at least tell me what Sony model this is based off, so I can try to get a part based on that info?
Thanks
traudio
Try writing to them at Xindak. I have wrote to them before and they answered a couple of questions I had. Here is their email: info@xindak.com
Anyone know where I can get a replacement transport or at least tell me what Sony model this is based off, so I can try to get a part based on that info?

This should be the one: Sony SACD transport

If not, I'd highly recommend Electronic Express, Inc. They are in Chicago, very knowledgeable too, IMHO! Ask for Carol.

Good luck!

Alex Peychev
www.aplhifi.com
This link talks about replacing the transport and even has links to buying the transports on ebay. Good luck

http://www.sa-cd.net/showthread/62665//y?page=first
Is that the complete unit?
The problem with this machine is the drawer hangs up halfway in or out.

It can play sometimes if you manually move the gears to get the sled to pull in all the way and bring the laser up in position.
Dear Traudio,
The links about the KHM234AAA, sent to you by myself and Alex, are of the complete transport unit. What you seem to want is the plastic holding mechanism for the transport unit. Any repair shop that works on cd players can likely remove and clean this mechanism, as that likely is all that is required for proper operation. I once had this problem on a Theta unit back in the late 90's and had Theta clean the unit and it came back working as new.

Steve