Bryston 4B3 vs Mac MC462 vs Pass Labs X250.8, OR... GRYPHON Diablo 300?


Hi,
Over the next few weeks I am organizing in-home demo of  three pre/power amps for my B&W 803D2's, and will purchase whichever sounds best.  I will be testing the following gear, which is based on what's available where live:
-Bryston B173 / 4B3-McIntosh C47 / MC462
-Pass Labs X250.8, if I can get my hands on one (will probably use the C47 pre-amp to test with this)
The Gryphon Diablo 300 is also a candidate.  I've seen some strong comments from others that Gryphon is in another league compared to the others.
My question is, barring what sounds best to me during my auditioning, in general to most people would the Diablo 300 really beat the others in my list?  And, are there any material disadvantages to sound quality considering the Diablo is an integrated vs the other choices?  I don't really care about having separates, but sound is obviously important.
Secondly related to the Gryphon, there is only one Gryphon dealer that is even remotely close to me.  Should that dealer cut ties down the road, or go out of business, does anyone know how I might go about getting service for the Diablo should I require it at some point?  Is that a valid concern?  There are multiple Mac dealers near me so that would not be so much of a concern.

Thanks in advance for any feedback....


nyev
nyev
Looking forward in reading about your audition today.  Happy Listening!
Looking forward to this review as I own a pair of B&W 803 D3 speakers. I’m looking to buy either the Mark Levinson 585 or the Diablo 300.

I found the 585 drove 803 D3 speakers with authority. I ended up turning the volume up on quite parts and was caught out with louder sections (kind of difficult to describe) (I used the track below). Which I liked, not something I’ve heard before. I hoping this amp is the same with a lot more than a 585...

It would be nice if you can listen to- Fleetwood Mac - The Chain

This is a good track to test dynamics.
My dealer said that the delivery of their Diablo demo unit to their shop has been delayed due to the unusual amount of snow we are dealing with on the west coast.  The shipping company currently shows it should be delivered this afternoon, but I’m sceptical of that and there probably won’t be enough time for an audition even if it did arrive today.  Since I’m travelling, my last chance to audition on this trip will be tomorrow afternoon, but I’m not sure they will even have got it in by then.  It’s a tiny amount of snow but we are not used to dealing with it on the west coast so all the roads are backed up.  It’s looking like I may need to come back for the audition after the snow is cleared, maybe this weekend.
I’ll listen to The Chain again (haven’t heard it for a while) and consider adding it to my audition playlist. Dealer said he prefers to use Tidal HiFi for auditioning.  So far my audition playlist contains songs that have very specific passages that have exposed other amplifiers as not quite doing well enough in particular areas, especially when A/B testing those same passages with a second amplifier.
Tested the Gryphon Diablo 300 today. It really is very confusing testing in-store instead of in-home. At this point I THINK I am proceeding with the Diablo. The shop had them connected to the B&W 802 D3’s (for reference I have the 803 D2’s so a much different speaker. Used Transparent Reference speaker wire. My first reaction was one of completely losing my bearings, due to the soundstaging. It was actually so distracting that I had trouble focusing on my usual areas of analysis. I am not a very good audiophile.... The vocals were so completely formed at pinpoint dead center it was spooky. It took some getting used to. When I shifted or turned my head it really messed with the soundstage which was even more distracting. Then I discovered if I leaned forward I found the soundstage was much less fragile when shifting or turning my head. I concluded the speakers were towed in too much. The experience for me was similar to using a very good pair of headphones. I now understand what others say about the Diablo being “muscular” and “controlled”. I’m not sure I enjoy this effect, vs a more relaxed and “free-flowing” effect. But I do think I’d get used to it. Transparency and detail was very good. Overall this is miles ahead of everything I’ve tried up to now. On the other hand I did have a bit of trouble engaging with the music - it was very controlled, a bit “uptight” vs relaxed and flowing. HOWEVER- I am 90% sure that the elements I found slightly unenjoyable could be attributed to the speakers. When I bought my 803 D2’s I compared them against the 804D3’s and concluded the D3’s midrange, while more detailed, was too forward and aggressive for me. So I am thinking this effect is likely present in the 802 D3 as well. Now I need to decide whether to take a chance and proceed with the Diablo 300. As I said, I was very impressed. Just think it was the B&W 802 D3’s that weren’t really my thing. I do need to travel to visit this shop so maybe I need to head there for one more session and maybe I’ll try a different set of speakers this time. Or maybe I’ll just take the plunge.... Need to think on this. Lastly I didn’t bother testing the McIntosh 462. I know the Diablo was not even comparable to the 452 so I knew the 462 wouldn’t have a hope. I just focused on the Diablo. As you can probably tell I left the audition impressed with the Diablo but also a bit confused.  Oh one more thing. I’m certain that Fleming subcontracted Batman to design the Diablo chassis. And the remote. Which doubles as a weapon.