Cannister VAC DIY Record cleaning...?

As someone who sold vacuums for a living almost 30 years ago I will tell you to NOT use any home vac not designed for wet use (ie. not a shop vac) to vacuum even the smallest amount of fluid. You can buy small shop vacs (I can't really vouch for their effectiveness) for $30 or so.

Before my KAB EV-1 arrived, I couldn't resist and simply used a shop vac with the upholstery attachment covered in felt with a slice cut into the felt along the opening of the upholstery tool. Worked fine but the suction was heavy duty-a hole drilled through the attachment would have allowed me to regulate the suction by varying coverage over the hole, but my KAB was on the way so I didn't bother.

If you feel your commitment to vinyl is going to be permanent, buy the KAB for $160 and use it with a top quality vacuum and decent fluids. Short of Loricraft or Monks it will give you the best quality cleaning there is, be easier on the ear than any of the Nitty Grittys or VPI's and be hundreds cheaper.

Found a couple of procedures for the Magic Eraser in this thread.

Hdm, what's the reason for not using a home vac? I see the KAB EV-1 is used with a home vac...

You can use any vac, wet or dry, with the KAB, because the KAB traps all the fluid. Vacuuming any liquid directly into a machine not designed for wet use is going to kill it; the fluid will end up in a motor which is not designed to handle fluid. Unless I misinterpreted your post and your statement that "I wouldn't think there's enough fluid to be any concern", I was taking you to be vacuuming the fluid into a home vac designed strictly for dry use. Just pointing out that this is definitely not adviseable.

OK. Thanks, Hdm.

Look at http://www.smartdev.com/loricraft.html and see how Loricrft uses a Mason Jar to seperate the fluid from the vacuum air. This would work with your Oreck and you wouldn't have the shock hazard of getting liquid in the Oreck.