Crossover for music and movies


Hello, I recently bought a Marantz NR1506 and went through the Audyssey setup process; tweaked the settings a little bit from there, and it's sounding great. My problem is there is no crossover set on the Front L/R speakers (floor standing), which is good for music, but I would think for movies I would want a little bit of HPF on those as to not interfere with the sub.

Maybe this is a stupid question but is there a way to have different settings for music / movies, or stereo / surround?

Thanks
128x128tbhockey

Showing 1 response by auxinput

There are two ways that a movie DVD/bluray will play bass (depending on how it is mixed/engineered).  Sometimes bass effects will come from the left/right channels.  In that case, they will be sent to your left/right speakers if you have set your left/right to be "LARGE" with no crossover. 

Other times, bass effects will come from the ".1" LFE channel of the movie sound mix.  In this case, it will only be sent to the subwoofer, unless you have the subwoofer disabled on the Marantz.  If you have no sub, the bass will be sent to your left/right speakers.

I have had movies that use both left/right channels as well as the ".1 LFE" channel for different bass effects.  In your case, you could set the left/right speakers as "LARGE".  Or you could set them with a very low crossover point such as 40hz or 50hz.  This would allow the left/right to play most of the music low-end, but the Marantz would still send very low bass effects to the subwoofer.