Do I need a power conditioner?


I’m in the process of dropping a dedicated 20 amp circuit or 2 into the music room.
So if I have a dedicated circuit for the amp, and a dedicated circuit for everything else,
is a conditioner useful?
I have several fairly decent systems going that I tweek and retweek.
Just got around to upgrading cables. Avoided conditioners because, in general, they dampen the presentation.
Was using a PS Audio PPP for low power components. But fell for the Shunyata spiel.
Plugged in a Hydra 4 with a Python Helix and was very happy with how it cleaned up the Zu Druids.
Seems high sensitivity speakers maybe reveal the grunge also.
Moved it to my system with the Martin Logans and the presentation seemed a bit lean and just a bit lifeless, using just copperhead cable to Hydra. (using all Pangea to get from the Hydra to other components.)
Then I put a Black Mamba from Classe amp straight to the wall and Wow! Single most significant tweek ever for me.
So I’m thinking, maybe I don’t need the Denali I ordered if I just use a couple dedicated circuits and some Shunyata power cords everywhere.
Opinions?
Thanks. :)
leotis

Showing 1 response by markmendenhall

Perhaps somewhat off topic but related; I have a hydra and plug the tuner, cd, phono into it but prefer the pre amp and amps plugged directly into the wall.   Someone above mentioned  flourecents;. OMG did my fluorescent front porch light cause me a world of hurt until I figured it out!   Stereo system was on its own dedicated 20 amp  circuit, problem is/was at the panel all the negative leads in the panel shared the same circuit, only the positives were not shared.   Once the front porch was turned on all hell broke loose!   LOUD buzzing which fried tweeters, tubes, mid woofers; very expensive problem.   Fluorescent lights pose a real problem.  Avoid them or own sufficiently shielded components.   My old Doge pre amp failed that test miserably.  Solution: A very well built First Sound tube pre amp.   And keep
the front porch light turned off when rockin'!