Dynavector 17D3 w/Audio Research SP15


Has anyone used this combination together? I am interested in getting a 17D3 however, it has a very low output and I am not certain how it will work with this pre-amp. If you have had any actural experience with this combination, I would be interested in hearing from you.

Regards,

AEW
a_e_watkins
AEW,I own a highly modded SP-15(Great Northern Sound Mods),and have to tell you the gain is quite sufficient.It is actually "70",so even low output MC's will work.Btw,this is a superb pre/phono,and can stand up to some big hitters.

Good luck
Listen to the Speedy one on this ...

I have a FAQ on system gain and what it means. Like all numbers, you still have to give a listen. A noisy circuit with theoretically enough gain will drive you out of the room ... or not ... depending on your tolerance for this sort of thing.

Like effective mass / resonant frequency equations, you'll at least know combinations which absolutely won't work.

Click this link if you're interested:

http://www.galibierdesign.com/phpbb/viewtopic.php?f=13&t=35

Cheers,
Thom @ Galibier
I am using the 17D3 with an ARC PH3SE, which has a gain of 59 I think, and it is sufficient gain for me anyway...it sounds real nice too! :)
B