From what I gather, my Genesis 2's have the Carver ribbon on them. Anyone certain of this ? Also, does anyone have any information or copies of reviews, or manuals on the Genesis 2 system. Your help is appreciated.
Mark
Mark
Genesis 300 transducers
I recently bought a pair of Genesis 300's. After setting them up in my room and making a bunch of measurements I noticed about a 10dB difference between the right and left speaker around 10kHz. At first I assumed that the tweeters had something funny going on, but after more study I noticed a difference in the planar transducer attachments.
One speaker has a red and black wire coming out of the transducer with two wire connectors connecting it to the wires coming off the cross over. The transducer also has a Bohlender and Graebner sticker on it.
On the other speaker (with lower output) there are no stickers and the wires coming off the transducer are gray and white. These wires are soldered to the wires coming off the crossover with heat shrink on them.
If there are any Genesis 300 owners, or 350's for that matter, out there. Could you tell me which is the original transducer? Also, does anyone have any suggestions on how to balance the sound of these two beasts without buying 2 new RD-48's from parts express?
One speaker has a red and black wire coming out of the transducer with two wire connectors connecting it to the wires coming off the cross over. The transducer also has a Bohlender and Graebner sticker on it.
On the other speaker (with lower output) there are no stickers and the wires coming off the transducer are gray and white. These wires are soldered to the wires coming off the crossover with heat shrink on them.
If there are any Genesis 300 owners, or 350's for that matter, out there. Could you tell me which is the original transducer? Also, does anyone have any suggestions on how to balance the sound of these two beasts without buying 2 new RD-48's from parts express?