Kinki Studio EX-M1


I’ve always wanted something simple and not a jack-of-all-trades when it comes to my stereo. KISS (keep it simple, stupid) is something I use in my approach to most things in life. Why overcomplicate? The Kinki EX-M1 is just an integrated, and that’s not meant as a pejorative. There’s no DAC or streaming capabilities, or room correction algorithms built in, and it won’t fold you laundry. There are 4 inputs out back, three unbalanced (RCA) and one balanced (XLR) which I’ve read is a simple and not a true balanced. Either way, it adds another type of input which can come in handy. The binding post are copies of WBT versions and are a joy to work with.

It has a frequency response of 10-150kHz (+/- 3db) and outputs 215W into 8ohms. It retails for approx. $2,200. Here is a link to more specs:
https://www.vinshineaudio.com/product-page/kinki-studio-ex-m1

Because of it’s silvery finish it has an imposing appearance but compared to my black Marantz PM-15S2b, it’s about the same size. Personally, I love the look. When they say it’s built like a vault, this is the vault they refer to. The weight is imposing as well (55.12 lbs.) so take care when maneuvering it. You can turn it on with the remote or by pressing in the selector knob on the left. Turning it off is done by pressing and holding the same knob for 5 seconds, or by remote. The default volume setting when turned on is set at 10 so make sure to turn it down to 0 before playing anything unless your speakers are of low sensitivity. A well made manual is supplied but alas, it’s only in Chinese, but Alvin told me they’re making one in English.

Having 255 steps of attenuation gives one extraordinary range to get to exactly where you like to listen. You can go up 10 to 15 steps and not notice much of a change, at first, until something dynamic asserts itself or when you realize that in general, it’s now more impactful. Using the remote allows you to quickly go through the steps and adjust on the fly. I find this most handy and now use it to tailor the song or piece of music to my tastes.

As an integrated, it simply excels in it’s purpose. As verbose as I can tend to be, it leaves me speechless in describing it. It does nothing to detract. It does everything to commend. It’s incredibly fast and yet so utterly smooth. Musical presence is immediate but not etched, hyped or shrill. It’s light on it’s feet but can pounce and stomp when called for.

Liu, the amp’s designer, does not believe in exaggerated base and yet this amp goes lower, tighter and simply growls tone, details and ambience that I haven’t heard before. Lower registers of the piano left me slack jawed as I basked in the reverberations of the soundboard. The same goes for cello, guitar, percussion and massed strings. Imaging is the best I’ve heard in my system. Nothing wavers (unless done in post production) and separation is tops. With The Milk Carton Kids, the two of them finally are completely separated and at a greater distance apart than what I’ve been used to or thought they’d be. Small chamber music pieces have me scanning the soundstage as different pieces play distinctly in their own space. Back up vocals are distinct as well with no smearing. They may harmonize but they are clearly different.

Highs are fully extended, again, beyond what I’m accustomed to hearing. They can go on well into a piece and you can hear the decay even when some bigger play takes center stage. Bells and chimes can tickle like the real thing. And speaking of stage, it’s of one piece, the same no matter where you care to go. All the way left, right, up or down, even as far back as you care to look. The strength of the music lies everywhere you care to listen. The only limits are what was done in the recording.

It has no noise floor that I can detect. On Abdullah Ibrahim’s The Song Is My Story, he’s not up on stage, as usual, but I’m sitting next to him while he plays (I listen in the near field so that helps). The piano is the full width of the soundstage, steady as a rock, and the notes flow out around, up, and beneath me (great mike placement). Notes can and do come out of a completely black background unless the recording is done with less tricks and then you easily hear the venue, the room, the stage, the setting. And, I never thought I’d say this but FM now sounds pretty fantastic, considering it’s limits.

The sound is so pure that it’s reoriented the way I listen to music. I no longer listen analytically but for the sheer pleasure. It’s so rewarding and relaxing. Listening to favorites, I’ve noticed that some sound different enough for me to notice that there was some exaggeration or emphasis of certain parts of the frequency with my older set up. Whether it was the house sound that some say certain brands have or just the limits of the design I can’t rightly say. Maybe it’s all the extra circuitry added to accommodate all the extra features I have no use for. No matter. I’m content. Happy as a puppy with two pee pees.

Also, I have to give thanks to Alvin for his great customer service. He’s the most attentive distributor I’ve dealt with. His response to any question I had were immediate and thorough, as long as one is mindful of the time differences (just check your clock on your smartphone to coordinate appropriate time zones). 👍 He even followed up with shipping notices, delivery times, and any question I had with the unit’s operation or features, which reminds me, since it draws about 30-40 watts when on, make sure to leave it in standby when not is use. It can get very warm to kind of hot, but not hot enough for me to lay my hand on it for any length of time. If I had more space it wouldn’t be a concern (it cools off quickly). That leads me to believe that maybe since my JBL 4319 monitors are 92db, and that it doesn’t take much to make them sing, that the EX-M1, which is a Class A/B design, operates in Class A for the first several watts, which could account for the warmth of the unit along with the wonderful tonal density and texture. Someone with more know how can look into that.

All in all, it’s the best money I’ve spent and now I have no desire to upgrade to some PC based system. My CDs and SACDs sound fantastic, even the old ones along with the reissues. To think you’re getting a real taste of what the well heeled have been enjoying for a fraction of the price makes this a true bargain if there ever was one. Let me also add that I received no consideration from the manufacturer or distributor and these are my views and opinions.

All the best,
Nonoise






128x128nonoise

Showing 19 responses by uncola

I just set up my kinki integrated tonight and have been listening to it for about 7 hours.. I already had a boutique preamp and amp so I wasn't sure how much room for improvement there was but I definitely notice an improvement in speed and tightness with percussion and general transparency.  trying it with my supra silver plated power cord

Hey here's my unboxing photo album for the kinki:
https://imgur.com/a/bv8ZDQw

here's my old system:  Oppo Sonica DAC Ric Schultz modded version, Hattor Active balanced preamp with burson v5 opamps, Folsom TDA7297 15 watt ab amp, New Philharmonitor raal/5.5" revelator bookshelves sitting on isoacoustic aperta stands on a computer desk too close to the wall.

new system is the same but instead of preamp/amp I'm using the kinki!  




I think he's using the teo audio liquid metal conductor interconnect cables.

I'm still breaking in the kinki with my bluejeanscable lc-1 cables, later I'll try my kabusa spiral air litz conductor cables between my dac and amp.

2 minutes 30 seconds into the pink panther theme, the amp startled me with dynamics https://open.spotify.com/track/0juPSJLFnLFim7BK6VzTes?si=Rk6KUh9EQdCFIA8QT8avog
Nice speakers maritime.  I have the poor man's r900 in my home theatre, the q900.  My main setup is actually my computer desk because that's where I listen to music.  

The kinki actually does get pretty hot for me..  and I listen very close to the speakers..  it takes awhile to get hot tho.  86db 8ohms nominal bookshelf speakers
hey guys the thread is pretty quiet, thought I'd upload some content :)
Keep in mind I have the amp in a non air conditioned bedroom in hawaii where 83f is the average temp this week.

other measurement is oppo sonica dac

https://imgur.com/GNML6D6
https://imgur.com/S7xW2GT
That's been the opposite of my experience..  I usually listen between 10-15 on low gain..  but I do listen very close to speakers...  But it seems to have as much power as my Odyssey kismet 200 watt monoblocks which have like 180000 uf in filter capacitance and 650va transformers each..  speakers are 86db 8ohm bookshelves..  would using high gain help you keep the volume control in a more useful range?
It's funny but my friend said his chord Dave dac was more sensitive to power cord changes than his amps so I've been using my nicest cord, a Grover Huffman with my dac and a diy 3 ft supra anniversary cord with my amp.  Hard for me to tell a difference but it makes me feel better :p
I went back to my old folsom tda7297 amp for a while.. wow the downgrade is definitely noticeable, although the folsom is still great and runs cool to the touch because it's only 15watts class ab..  Will switch back to kinki ex m1 soon
All this guessing seemed silly so I popped open my remote control, inside was a panasonic cr2032

here's a picture https://imgur.com/a/35s3urT


I think it might be cr2025, you can find them anywhere that sells those coin sized watch batteries
Seems like the 2016 and 2025 are also compatible, but the 2032 will last longer because it's thicker and has more battery chemicals inside.  

" The CR2016, CR2025, and CR2032 cell batteries all have the same voltage. The diameter of each battery is the same, at 20 millimeters. However, the CR2016 is 1.6 millimeters thick, while the CR2032 is twice as thick, at 3.2 millimeters. The CR2025 measures 2.5 millimeters in thickness. The size differences allow the CR2032 to hold more lithium-based chemicals and provide 240 milliamps. The CR2016 can hold up to 90 milliamps, while the CR2025 can hold up to 160 milliamps."
D2girls nice, I hope you like the pairing with your jbl.  Did you get inspired to get the jbl from wTching kenrick sounds d videos on YouTube?
yup!  Time to put the top back on and carry my old amp to the giant pile of unused amps in my closet :P

Here's a sexy pic of the amp with no top on.  btw opening it is tricky, ask for help if you need to for some reason.  There's nothing inside to adjust though, no trimpots for bias current or things like that.  

https://i.imgur.com/kwmnZO3.jpg
Hey guys I finally replaced the preamp/volume control board in my kinki.  They sent me a replacement board at my request.  Just wanted to report that it took less than an hour with me being very careful and taking lots of pics to remember where everything was plugged in before starting work.

Now my channel balance is perfect between lvls 16-32. It must have been one of the relays like you guys guessed.

Listening to the Bohemian Rhapsody soundtrack in flac and the foot stomps in We Will Rock You are transporting me to a stadium :)
You have to ask for a custom preamp bypass rca input when you order.. I think it adds $100 to cost?  Very reasonable
ocd hifi guy's recent video showing the kinki powering the magnepan .7 speakers with zero distortion even with volume at 100% has me considering them.. I was kind of long term planning on something like spatial m3 turbo s but the magnepan are also interesting.. I already have a sealed sub to use with them.


My dac has 2.5VRMS output and my speakers are 90db sensitive.. I usually listen to music around 10-15 during the day and 3-4 volume late at night..  For movies 15-25.  low gain enabled.  I agree there's no loss of detail or quality even at volume level 1 which is nice.  If you have super duper sensitive horn speakers you might not have enough fineness of control at low levels.. if you have a small room or listen at low levels like at night..