Update:
I've been looking at possible solutions for wall mounting my CC3 and, since there's been a lack of suggestions from members, I thought I would give an update by detailing the best solution I've come up with thus far:
I believe the Omnimount Play25X LCD hdtv wall mount may be able to have the CC3 mounted to it and position the center ch speaker about 3' out from my front wall and centered just above my hdtv. Here's a link to the Play25X mount on Amazon
www.amazon.com/OmniMount-Play25x-Extension-19-Inch-37-Inch/dp/B00BCA41C0/ref=cm_cr_arp_d_product_top...
This mount looks like a good candidate because it's designed for tvs up to 25 lbs and the CC3 weighs 20 lbs, it has the ability to be pointed at a slight downward angle towards my listening position and it has a hdtv metal mounting plate at the end of its 2nd arm that I think can be used, in conjunction with the 3 T-nuts that already exist on the top and bottom of the CC3 just underneath its fabric, to attach the CC3.
My thought is that these 1/4" x 20" thread T-nuts could be used to attach the CC3 to the Play25X's metal tv mounting plate. I know that the T-nuts on the CC3 each consists of a threaded 1/4" metal barrel firmly attached to the speaker but I'm not very familiar with the various ways they can be utilized to attach the CC3 to the mount's metal plate.
This is where I need help from anyone who is more familiar with T-nuts than I am.
Can anyone tell me how the CC3's top and bottom center T-nuts (3 that are located on the left, center and right side on the bottom and top) can be utilized to securely attach the speaker to the wall mount's steel plate. Ideally, I was thinking a strong strap that could be channelled through the steel plate that had bolts on each end that could be screwed into the T-nut barrels until this strap was taut and secure.
Thank you,
Tim
I've been looking at possible solutions for wall mounting my CC3 and, since there's been a lack of suggestions from members, I thought I would give an update by detailing the best solution I've come up with thus far:
I believe the Omnimount Play25X LCD hdtv wall mount may be able to have the CC3 mounted to it and position the center ch speaker about 3' out from my front wall and centered just above my hdtv. Here's a link to the Play25X mount on Amazon
www.amazon.com/OmniMount-Play25x-Extension-19-Inch-37-Inch/dp/B00BCA41C0/ref=cm_cr_arp_d_product_top...
This mount looks like a good candidate because it's designed for tvs up to 25 lbs and the CC3 weighs 20 lbs, it has the ability to be pointed at a slight downward angle towards my listening position and it has a hdtv metal mounting plate at the end of its 2nd arm that I think can be used, in conjunction with the 3 T-nuts that already exist on the top and bottom of the CC3 just underneath its fabric, to attach the CC3.
My thought is that these 1/4" x 20" thread T-nuts could be used to attach the CC3 to the Play25X's metal tv mounting plate. I know that the T-nuts on the CC3 each consists of a threaded 1/4" metal barrel firmly attached to the speaker but I'm not very familiar with the various ways they can be utilized to attach the CC3 to the mount's metal plate.
This is where I need help from anyone who is more familiar with T-nuts than I am.
Can anyone tell me how the CC3's top and bottom center T-nuts (3 that are located on the left, center and right side on the bottom and top) can be utilized to securely attach the speaker to the wall mount's steel plate. Ideally, I was thinking a strong strap that could be channelled through the steel plate that had bolts on each end that could be screwed into the T-nut barrels until this strap was taut and secure.
Thank you,
Tim