Monitor close to the wall to replace Allison 4s

Al, I am both paralleling and biwiring, since each amplifier channel is driving both hi and low pass terminals- exactly as though they still had jumpers in place! But I will change that and not have any connection between the high pass and low pass terminals any longer.

Ok, I see what you are saying, Denis. I hadn't understood the reference to 4 runs of single cable. So you are biwiring to each speaker from the outputs of each of the two channels of the amplifier that is dedicated to that speaker. As you say, that amounts to both paralleling and biwiring.

A number of people have reported here that paralleling speaker cables (as opposed to amplifier channels) has resulted in some improvement in sonics, in their systems. So connecting two of the runs between the low frequency speaker terminals and one channel of the amplifier, and connecting the other two runs between the high frequency speaker terminals and the other channel of the amplifier, would seem to be worth trying, and might produce results that are at least slightly better than biamping with just two runs in total.

Regards,
-- Al

Yes, Al, that is what I am doing and in fact do double runs of Clear Day and Acoustic Zen in my home system as well (to combine silver and copper) and get a lot more air around the top end. Sorry that I have got off topic here, but appreciate your help and your suggestion, Mike. Back to the OP: So what about the Joseph RM7XL?