Paradigm 100 v2 vs PSB goldi

Guys something is not working properly, just after I sent again the response note, my previous post appeared in my screen (didn´t before)which led me to post again, my apologies.
Sam in my case I do have small kids and do favor having four contact points for the speakers than three and yes he mentioned 4 instead of 3...the stock spikes allow the cabinets to sway a little if pushed. Also he stressed the importance of having good direct contact between the spikes and the cabinets. Good Luck and enjoy

Well I ordered a set of PolyCrystal speaker spikes from cable Co. to replace the spikes on my PSB speakers. These
are brass with polycrystal coating, 1.75 tall, probably similar sounding to audiopoints, but I get a better price through Cable Co. The spikes that come stock are just 1/4 - 20 thread stock with a ground point and locking nut, must cost less than $1 for all 8.

Megasam:
Let us know about the spike change and your findings

Noticed you have DH Labs Q-10 and Goldi's. I have the Goldi's and am considering the Q-10 wire. What do you currently think of it?