Room acoustics: diffusor or absorber?


Hi!
I have Audio Physic Virgo II. in the middle of the room at the long wall, like the Audio Physic recommendation. The listening position is just at the wall.
I treated my room with absorbers (by John Risch homepage) at the side walls, and diffusors behind the speakers with good result.
I do not know what shall I put behind the listening position at the wall: diffusor or absorber, or just leave the wall untreated?
Thank you
norbert2
Diffusers would work best - absorbers would just deaden your room. However since your chair is against the wall I think you would not really gain by treating the back wall at all. The further out into the room you put your chair the more you want to diffuse the reflections off this wall.
I have a setup similar to yours and I use three RPG ProFoam Level 1 difussors mounted on foam board. Works great. You can also make your own RPG Skylines clones cheaply.
I made my own skyline diffusers.A 48"x48" for 23.00.They are not to spec but......neither am I. It does involve purchasing a cutting tool for about 30.00 . I'll send you pics and advice if you want.When it warms up I'll take them outside and spray them the color of my walls with a wagner sprayer and some flat gray waterbase paint.The difference in the plain walls and the skylined walls is unbelievable.In my mind room acoustics are the last frontier.Good luck.
Check a thread titled "Diagonal room placement." Rhyno shows how to make the clones.