@stringreen I fully agree that an azimuth/crosstalk calibration is super important. Adjusting for azimuth on an SME V tonearm is very difficult, but possible. (It takes me a few hours.) Unfortunately you have to play with the cartridge on the arm, instead of being able to rotate the arm or headshell, so it ends up being a lot of trial and error until you get it right.
VPI Classic 3 or SME 20/2
Hello all - I'm considering moving from my Classic 3 with 10.5 3D arm to the SME 20/2 with SME V arm and I wanted to see if anyone out there has made this move (or a similar move) and if so what are your impressions. I'm using a Benz LPS cartridge right now and use the Allnic AUT2000 step-up transformer into the MM phono stage of my VAC integrated (sigma 160i). Overall I am very happy with my vinyl sound right now - I'm only considering trying the SME because it is available for a good price within driving distance and it's such a ballyhooed tt that so many seem to consider a destination piece. (I also, like many of you I imagine, enjoy trying new gear.) But it will be a bit of hassle doing everything involved to make it happen and so if it is going to be largely a lateral move I'd prefer to avoid the effort. I'm aware that the SME V doesn't allow for azimuth and on-the-fly VTA adjustments. Have also read that the Benz LPS is a nice match for the SME V. Also painfully aware that there's no way to know without hearing with my own ears - I can (and will) audition the SME but I never have much success getting a feel for other gear in short auditions in unfamiliar rooms. So any impressions out there would be much appreciated.