We Need A Separate Forum for Fuses

P.S. The same naysayers and trolls are affecting this forum as the SR Red/Black/Blue forums.  Too bad.  Audiophiles should try the fuses before making up their mind.

Elizabeth,  I use the Walker Talisman, an expensive pair of magnets but easy to use, on every CD and DVD I play.  The results are obvious when the disc has been played through and magnetism adheres to it.  I also use it on LPs but I'm lazy about that since it takes longer to sweep the record on and off motions 5 times to complete the demagnetization.  Thanks for your informed comments.  It's a big relief from the naysayers.

douglas_schroeder

It might be interesting to see how many fuse Skeptics and Adopters own digital or analogue front ends. Could we add this to the survey?

I'm a skeptic with both analog and digital front ends, but I'm not a naysayer. I learned long ago not to judge the sound of anything without listening. Similarly, I won't buy a car I haven't driven, or buy a suit I haven't tried on first.

I'll probably experiment with a fuse or two sometime. It just isn't high on my priority list.

Meanwhile, everyone here should be able to discuss their experiences without some of the acrimony that results, imo.

@geoffkait "The fusible element is comprised of thick film gold that is deposited on a thermally and electrically insulated substrate. A complete range of fusing values is achievable by precisely controlling the fusible element print thickness and geometry. Thick film silver termination pads are placed at each end of the thick film fusible element. The fusible element is completely covered with an arc suppressive glass."

That's exactly the material I used to R&D and produce.  Beyond the full spectrum of thick film, we also made thin (metallorganic and organometallic) film, gold powders, glass (sounds like a single item, but we had too many formulations to list or discuss here), dielectric tapes, solder, etc.  Most fun at work I ever had, and a fair number of us were audiophiles.

Whose thick film did you use, and what means did you use to apply them?  Your substrate was alumina or something else?

I was quoting an article on the subject of the then new NASA fuses. I mentioned in my post it was an excerpt of an article. ‘‘Twas not I. My association with NASA ended long before that article was published.