Zu Omen or Tekton Lore

Eric just announced my SE Pendragons will be with m in a week.
Eric new custom drivers and he now has some New crossover
Additions tell this will be very good.i have modded crossovers for years
The new Duelund resistors are the best by far Ever made,and the Munorf Silver oil are special. Through the grapevine Eric has also got his hands
On the hot new Jupiter- HT flat stack caps to compare to really shake up
He competition he Jantzen Copper Copper coils he uses are excellent.
These SE uses custom Seas Mid- Woofers,and the 3 tweeters are the very
Good Scanspeak - ring radiator from their upper discovery line.
Zu speaker ,are not ,accurate bloated bass,and get this -charge $2k
For custom paint. Eric will do any color depending on complexity
For $350- $650 .Eric is a very good honest guy ,and a great guy for the
Working Audiophiles out there.

Scutterflux (or anyone with hands-on experience with changing out crossovers, caps, resistors, etc.):

I suppose it depends on the speaker, but specifically with the Tektons, how difficult is it to change out these components? If one doesn't like the change, how close is reverting back to stock going to get one back to the original sound? It seems to me that replacing components back and forth is still a change from its original configuration. Kind of like the Heidenberg principle...

My Pendragons ship today. I hope to have them early next week.

Shakey

Regarding crossover mods, I'm also curious if people are modding them inside the cabinets, or if you're able to remove them from cabs. I've opened mine up a couple times and don't see how the crossovers are attached internally, assuming some kind of glue, and not wanting to start trying to force anything in there. Is there a trick to it, or do you just have to be really agile inside there with your soldering iron?

You have to remove the lower woofer and the crossover is glued to the center brace. You have to pull it out and then you will have to cut the wires to pull it out. It would be very tight to work on it inside the cabinet.

If you mod the crossover, you will need to rebuild The entire crossover from scratch, oral east I did. The good news is that the parts are very inexpensive so it's not costly.