Nakamichi Dragon Performance with Type II tapes


Hi,

I recently acquired a mint Nakamichi Dragon. I tried recording from vinyl to TDK SA-X tape. The source/tape were not 100% identical, there was (very small) loss of metal texture in cymbal and high-hat sounds. Is this the media's (tape) limitation or is the deck malfunctioning?

Any help is appreciated.

Best Regards
livin_262002
I had no idea metal tape cost so much now. I have not used my Dragon for recording in several decades. But Inna, with all due respect, back in the day I really did prefer the sound of chrome tape. Metal always sounded a bit harsh to me, better specs notwithstanding. I was not the only one who came to that conclusion. Metal "superiority" was analogous to the way solid state gear sounded in the 70's and 80's during the "spec wars". So, Livin, you might just experiment, with an open mind.

cassettes are so limited in the high frequencies, that when archiving a cassette to digital now, I usually play it back without Dolby decoding, then e.q. They sound pretty dull, otherwise.
Yeah, why not experiment with different types and brands? Just don't push the recording level too far; I use 5 for type II and 7 for type IV.
When it comes to Vertex and TDK MA-R and MA-XG it is not only the tape itself that counts, it is the anti-resonant case. It make a lot of a difference. As far as I know, the tape in TDK MA and MA-R (MA-XG) is the same.
Unlike Vertex. It is not the same tape as Maxell MX and MX-S. Though many who pay up to $100 for Vertex are collectors, some are audiophiles. I don't pay $100 a piece but for $50 I would buy a few pounds. There is a reason for that. And no there is no harshness whatsoever.
Thanks HifiHvn,Lloydc & Inna. I'm going to try the TDK MA tapes this weekend.I'm also planning on bumping up Bias levels during calibration bu about 0.5dB. Will let you know the results.

Thanks for all the great advice.

Best Regards
Livin,if I remember right,you should be able to adjust the bias while your recording,to see what sounds the best.I don't know if this is how you've been doing it,but its the best way to do it IMO.
I also seem to remember that chrome tape was more enjoyable to me also.The metal may have measured better,but did seem to have a harshness or grain about it.Specs aren't always everything.Our ears still could out do the best measuring equipment.This is just my personal experience.I think TDK was my first choice, (more cleaner,and detail),then Maxell.The SA series was good,and its too long to remember the others.