Modification that has proved to be transformative


in a manner well beyond swapping out gear, tweaks, wire and the like. Ok Agoners I have owned and gone through lots of great gear as evidenced by my feedback:-)

However, over the past year I have learned something I want to share. Some of you will know all about this and others will have heard about it, but with doubts. Three words....

Duelund CAST capacitors

Sure, I have cap rolled and part rolled for a few years now. Fun stuff to do and sometimes I liked the change and other times not so much. However these CAST capacitors are an entirely different animal. I placed them in my tube preamp, hybrid amp and speakers. In each component the improvement was dramatic and a game changer in many ways. Universally, each component was greatly improved by a percentage easily exceeding 25 -30%. I can't understand why gear retailing for $10,000 or much more would skimp on a crossover or coupling cap. My hybrid amp used $30-$50 caps that sounded good, but not great. Same thing in my speakers for the midrange crossover caps. The Duelund CAST caps made these high dollar pieces sound the best they are capable of.

I picked these up at Parts Connextion at a great sale price recently. They are very expensive caps, but made more affordable due to the recent sale.
I cannot overstate how superior these are to all other boutique type caps often talked about in audio threads. This, at least in my experience, has been the case in my cap rolling endeavors. I say confidently they will greatly improve any component they are used in. No need to debate about synergy and the builders tuning with parts etc...as these CAST caps are just going to make good and great sounding gear much greater!

So if you have gear utilizing coupling caps in key circuit positions this is an upgrade that will deliver far more then their high cost. Spend your thousands here before any wire change or buying and selling gear. If your gear is of very high quality and the key circuit caps are good, but not Duelund CAST, consider a cap upgrade.

I purchased two .47 uf caps for $398 and four .22 uf caps for $800. I used these in my tube pre and hybrid amp. This is easily the best $1200 I have spent in my 30 plus years in audio. As much as wire and certain tweaks do improve the sound, these caps did even more. Other highly touted caps did not garner quite this reaction from me in my system.

Now, these caps would have cost me double this if not on sale. However, they would still have qualified as a best buy in terms of their impact on my music.
128x128grannyring
Yes, the VSF are flat style and may also fit. They are also very good indeed.

Charles, you would need to know the size of the space and cap involved to know for sure regarding fit. Perhaps you can find out the value of the cap needed and look up the physical size and determine if it will fit? Duelund has changed the look of the CAST over the last 5 years so perhaps the builder does not know today? The VSF would also be a big improvement.

Perhaps they won't fit, but I would check it out to be certain. You could also put it in a different spot also with some effort etc....it may require some creativity which can be fun.
Fizzletop,
Thanks for your feedback it`s inspiring.Your speaker apparently uses different caps from the Total Eclipse.The TE is very natural and disappears with most of my recordings.The possibility that it could further improve is tempting. Perhaps from excellent to truly sublime(like the amp and linestage are).This will take more investigation.Thanks again for your insight.
Regards,
My current speaker project involves nine caps per speaker! Yikes! I wish I only had one. These speakers actually came with some very good parts mixed in with mid grade $30 caps. The crossover is hard wired to boards resting in the woofer chamber. All those caps were rocking with the bass line and that is not ideal.

I replaced 4 caps in each speaker to Mundorf silver, gold and oil caps. The other 4 caps were already Mundorf SGO's. I replaced some Clarity SA caps with the SGO's.

I am intrigued with a speaker that only uses one cap? Interesting indeed. Mine is a three way Nola speaker. Not sure if the Coincident is a two or three way? I assume a three way? My speakers are about 89bd efficient so I bet my crossover is to blame for that. They are wonderful sounding speakers (Viper Reference 1ax's) and only two sets were ever made. The builder has been most helpful in this instance and is sending me some of his special internal speaker wire plus helped me with several questions.

The upgrade is almost done and they are sounding like speakers 10 times the price they cost me.
Charles, I just finished reading several reviews of your fine speaker. I now remember they are three way with 5 drivers! Amazing how efficient they are with all those drivers? Funny thing is I have always wanted to own a Coincident speaker. My audio buddy has a set of the Total Victory V's. I have listened to them on several occasions and liked them.

I actually make an offer last month on a set of TV 4's , but the offer was declined. So instead, I have decided to make my speakers be all they can be. The results are amazing thus far.

The fact that your speaker has such a simple crossover makes upgrading them very simple indeed. I would be in there looking at the internal wire, cap and resistor. That is a speaker you can keep for many, many years indeed.
Grannyring,
Your comments are on the money. Since Israel confirmed there`s only one capacitor per speaker it seems to me that an improvement there should be quite obvious and effective. The speaker wire is the same ultra quality wire he uses for his cables and for wiring his amplifiers and preamps(6N copper,I won`t mess with that. My thought is to consider the Duelund caps(Cast or VSF and their best resistors). I have a friend who`s capable of doing the work and can tell me if it`a go or not.

Grannyring thanks for this thread, it really has me thinking.

fizzletop, do you get to the crossover via the bottom of the speaker?
Regards,