I have heard neither of the mentioned amp mods yet but it is not a matter of Blackgates vs Jensen as the Jensen 4 poles are used in the power supply and the other diy mod has just a couple of Bg caps in the signal path.
The jensen caps are well known to sound better than even Blackgates when used in the power supply but they are not diy drop ins and require a lot more time and effort to install than any two pole cap.
I have had Blackgates and Jensens in the power supply of two different sacd/cd players but have not done a direct comparison on the same player but I will be in a couple of weeks.
Most pro modders will tell you that the Jensen is the best for power supply applications and the Blackgates still remain # 1 for signal paths.
If your in no hurry, I plan on buying an hca 2 soon and will do the signal path Blackgates myself and will send the amp to Doug at Asi for the Jensen ps caps and the other ps upgrades.
But my point was , you can't compare putting 75.00 worth of caps and wire to custom power supply mods, signal path upgrades and custom made parts that total over 300.00 , not to mention a lot more time being involved as opposed to the diy work.
I have used the Audio Consulting wire for ic's that replaced my Acoustic Zen ic's that cost 5 times as much but Audio consulting wire is not cheap at 3.50 ft for a single 24 ga strand and you have to figure multiple strands for an amp plus that cotton sheathing is not cheap either.
The jensen caps are well known to sound better than even Blackgates when used in the power supply but they are not diy drop ins and require a lot more time and effort to install than any two pole cap.
I have had Blackgates and Jensens in the power supply of two different sacd/cd players but have not done a direct comparison on the same player but I will be in a couple of weeks.
Most pro modders will tell you that the Jensen is the best for power supply applications and the Blackgates still remain # 1 for signal paths.
If your in no hurry, I plan on buying an hca 2 soon and will do the signal path Blackgates myself and will send the amp to Doug at Asi for the Jensen ps caps and the other ps upgrades.
But my point was , you can't compare putting 75.00 worth of caps and wire to custom power supply mods, signal path upgrades and custom made parts that total over 300.00 , not to mention a lot more time being involved as opposed to the diy work.
I have used the Audio Consulting wire for ic's that replaced my Acoustic Zen ic's that cost 5 times as much but Audio consulting wire is not cheap at 3.50 ft for a single 24 ga strand and you have to figure multiple strands for an amp plus that cotton sheathing is not cheap either.