2. amps-preamps
  3. 1076969830

McIntosh Question

Currently I have 1 McIntosh MC 162 briged powering on my right channel and 1 MC 162 bridged on my left. I have a MC 2105 powering my two side channels. My set up is B&W N804's for the fronts, a HTM1 Center, and N805's for fronts and rears. Here is my question. I was thinking about getting a McIntosh 7300 to run my fronts and have one 162 power the rear and the other then center channel. Any thoughts on how they would all match up?
128x128jof
aball
1,994 posts
 
I think Velo has a great idea. Check it out. Good luck - Arthur
theo's avatar
theo
2,331 posts
 
I agree use the MC352 for the fronts. I have a MC352 and MC7205 for the rears and center. I was using the 7205 which is basically the sam amp circuitry at the 162 and when I bought the 352 for the front what a difference. Not only the power but the clearity and definition on the highs and mids but the bass really tightened up. Although I acredit the bass to the added power but the Mc amps with the autoformers are a differnt league than the others.
jof's avatar
jof OP
6 posts
 
Thanks guys
More to discover