What's the best isolation system?


Let's hear your ideas on isolation. I'm hoping this will be a survey of systems featuring the different cone products including Mapleshade Triplepoints and heavy hats, Audiopoints various sizes and their footers, Black Diamond, DB Systems etc; through products like Vibrapod and the sorbathane gel feet,include the bearing type products like Aurios, and how you implemeneted or combined systems for the best sound.

If anyone has tried the Van Slyke Engineering Tri Orbs that have been heavily advertised I'd like to know also.

For instance I'm now using a hybrid Vibrapod sandwich which includes a set of Vibrapods (tumed for each component) a quarter inch piece of plate glass, and then Audiopoint or Mapleshade cones (I'm trying to decide between the two.) I have arrived at this combo by a couple of years of listening in a friends and my system by carefully substituting one product at a time.

Hope to hear from you all.
Steve
128x128sgr
Chelillingworth, I agree with Theaudiotweak. Maybe you didn't tighten the support rods enough. Depending on sand or lead,-- does make a difference. Also, the Delron isolators are essential to proper setup. Are you sure they are inserted properly? Thanks in advance.
warren
The Aurios 1.2s with 5/8" tungsten balls do a good job. Using a stiff cord is not recommended though.
Due to airborne vibration, there is no such thing as isolation. Direct floor coupling is the only thing that can work. If your component is truly isolated, then it will absorb all airborne vibrations, and have no load path to dissipate them. They will be dissipated into your component and affect the sound.
I suggest reading info at www.avisolation.com There is a wealth of info there.
the very best way to isolate your hifi with amazing results that will keep you smiling forever is to place your speakers on townshend audio seismic podiums , audiophiles and reviewers are going crazy about there amazing performance,
once you have completely isolated your load speakers down to 3hz , isolating the rest of your equipment is a doddle,
if you stay with townshend audio go for the seismic pods or even better the seismic isolation platforms again isolation is down to 3hz . 
all you need to do is find out what each speaker weighs , measure the speakers footprint that will then tell you what size is needed and what size seismic podium springs are required 
for great prices check out emporium hifi in the uk some items are 40??% off retail you cant go wrong your system will be completely isolated isolated from seismic vibration down to 3 hz the difference using these products are ground breaking do not bother with anything else its the best thing you can do for your system but start with the speakers townshend audio podiums you just need the footprint size ans the weight of each speaker job done