Worthwhile $5 Tweak


A recent thread at Audioasylum about an $800 grounding system being marketed at Audiogon got a response from an inmate there suggesting that making a clean and secure ground connection was a worthwhile thing to do. While I cannot comment on the system being marketed, I can tell you that checking the ground in my 40 year old house was a very worthwhile thing to do. An old clamp, all rusted up, attached the ground wire to my main waterline. Bought a new brass or bronze clamp for $4 Cnd. (the cheapies are about $1-looked at them and they appear to be the same as the corroded one I had), gave the water pipe a sand and clipped and stripped the ground wires down and reconnected. A very worthwhile improvement to sound quality for under $5-highly recommended if you are in an older (or maybe even newer property) without dedicated circuits, grounds etc.
hdm
Grounding...The basic rule is:

For analog circuits...single point ground. Do the preamp, and let everything else get grounded via their connections to the preamp.

For digital circuits....ground as many places as practical. Sometimes shields are best left floating at both ends.

For either type of circuit...Feel free to experiment. The rules are not cast in concrete.
Eldartford -

that makes sense for signal grounds but not for AC grounds (IMHO.).

>"Needless to say, floating the ground still helps."

Stehno: I am sure those power conditioners/line filters are nice. Still, I would have to guess the manufactuers does not endorse lifting the ground. None that I have owned have ever endorsed the idea, in fact most specifically say that it must be grounded. Some wont' even work unless they are grounded. (or will throw an error light).

The concept of gas filtering, while an interesting analogy, isn't really an accurate metaphor. Still, playing along with that - one would have to say, that if you took the fuel filter out of the circuit, and nothing was effected, did it really do anything at all? Lifting the ground, to me, is akin to taking something out, rather than adding something in (e.g. putting a fuel filter in-line).

For me, I prefer the grounds be in place, mainly for peace of mind, and since I don't hear a difference with lifitng them, I think that's my best solution.

YMMV,

-Ed
Ed: I am reasonably sure that the Foundations that Stehno uses come from the factory with the ground disabled (as the manufacturer figures they sound better this way) with the ability to reverse this. Stehno, obviously will be able to shed more light on this. It is interesting to note that a number of aftermarket cords do in fact come with the grounds disabled (although many of the purchasers of these cords may be unaware of this) or the ability to disable the ground for improved sound quality.
Stehno: I read Musicfirst's posting and explanation and it appears that he and i share several common theory's / beliefs. From what i can tell, it appears that these devices use several independent isolation transformers within one common chassis. At least, that is what i gathered from reading his posts. If such is the case, there is nothing new about this idea as it has been done in several other designs / products on the market. Depending on the quality and type of isolaton transformer being used and the layout of internal wiring, it is quite possible for one product with similar specs to perform very differently than another product of similar specs when it comes to real world situations though. Sean
>
Hdm, sorry for the delayed post. I believe that some of the LC's do come with the ground disabled. I've purchased all of mine used. I happen to have two with disabled grounds and 1 that is enabled. Funny because that's exactly the way I have my dedicated lines connected as only my preamp is grounded for best sonics.

Sean, I don't believe there was anything in MusicFirst's posts that would indicate the use of several independent isolation transformers. Although it's entirely possible.

As to your speculation of this not being a new idea? Again, I don't believe that had anything to do with anybody's point s above.

I was simply pointing out the superior performance of the Foundation Research LC-1 and LC-2 in-line power conditioners.

For those who take line conditioning seriously, you might want to hunt down a the August, 2003 review on these LC's from Marty DeWulf of Bound for Sound.

Marty DeWulf is a bit of a nut for line conditioning and claims these to be the best he's heard. Sold his previous line conditioners and now owns the Foundation Research LC's in his 'big rig'.

-IMO