Transformers are usually 96-98% efficient-this means that they convert 2-4% of their rated current to heat. Most units are designed to heat to 115C (@250F)maximum. Heat is generated regardless of load. It is a good idea to place a HD switch (disconnect switches work well)in the circuit beforethe transformer so that the current can be cut when the unit will not be needed.
Least Controversial, Reasonably Priced AC Upgrades
Hello Everyone
At last, the light is appearing at the end of my house renovation tunnel, and -- fingers crossed -- I may actually be listening to music in my new living room before 2005.
Having spent every last penny on marriage, family, Subzero refrigerators etc, I am trying for the first time to upgrade the wiring a bit and protect the equipment against surges.
Despite my enthusiasm for this site and a pretty decent system, I remain firmly in the dark ages on power conditioners, high end power cords, outlets, surge protectors etc.
The place where we are we are moving in the country apparently has frequent power outages, especially in winter when falling branches down the lines.
I have read many heated debates about power conditioners etc with some of you saying that they actually WORSEN the sound, that I would like to start with a simple:
dedicated line?
Albert Porters wall outlets?
a chunky power strip inside my new 6' component rack on casters?
a surge protector (Monster Cable?) to protect all of the above in my newly flaky electical district?
Again, simple, effective, not wildly expensive please.
The idea is to have a moveable rack of equipment on casters that I can wheel from the corner of the room to my listening chair for easy access, which will be tethered to the wall by one power cord only and with long interconnects to the amp which will be located by the speakers.
The rest of the spaghetti mess will stay neatly inside the rack, concealed by a ventilated door.
Thank you in advance for all ideas and suggestions.
At last, the light is appearing at the end of my house renovation tunnel, and -- fingers crossed -- I may actually be listening to music in my new living room before 2005.
Having spent every last penny on marriage, family, Subzero refrigerators etc, I am trying for the first time to upgrade the wiring a bit and protect the equipment against surges.
Despite my enthusiasm for this site and a pretty decent system, I remain firmly in the dark ages on power conditioners, high end power cords, outlets, surge protectors etc.
The place where we are we are moving in the country apparently has frequent power outages, especially in winter when falling branches down the lines.
I have read many heated debates about power conditioners etc with some of you saying that they actually WORSEN the sound, that I would like to start with a simple:
dedicated line?
Albert Porters wall outlets?
a chunky power strip inside my new 6' component rack on casters?
a surge protector (Monster Cable?) to protect all of the above in my newly flaky electical district?
Again, simple, effective, not wildly expensive please.
The idea is to have a moveable rack of equipment on casters that I can wheel from the corner of the room to my listening chair for easy access, which will be tethered to the wall by one power cord only and with long interconnects to the amp which will be located by the speakers.
The rest of the spaghetti mess will stay neatly inside the rack, concealed by a ventilated door.
Thank you in advance for all ideas and suggestions.
- ...
- 44 posts total
- 44 posts total