Do CD-R's sound the same as originals


does a burned copy of a cd sound the same as the original
soundwatts5b9e
I have burned close to 100 CDR's on my Dell computer with an HP burner. I copy all files to hard drive, then burn CD at 1X. I have not been able to hear any significant degradation in sound quality. I will not say the copies sound better or maybe even as good, but they do not sound bad. I have a superbly resolving stereo worth almost $15000. There might be a slight change in some characteristics, but I have not been able to pinpoint it. I do a lot of listening through headphones, and even then, I detect very minor differences. Could just be psychological. It is certainly orders of magnitude improvement over ANY home tape system, and I've owned three different RTR's and a pretty good cassette deck. Never satisfied with any form of tape (including 7-1/2 IPS on Revox), but CDR is almost as good as original. Most people would never detect any difference. If you detect drastic degradation, you're doing something wrong or your equipment is defective.
Kocho, is the dye material used at all a significant factor (from cynine to phthalocyanine sp?, etc.). I've heard that the better CD-R's take the laser info more cleanly since it is a "physcial" process, regardless of the accuracy of the machines at hand. A hypothetical analogy would be if we had some cutting tool, but the materials we are cutting are different (the different dyes), then the resulting cuts on each piece could be different. I.e. a conventional power saw running through wood will cut much differently than if we tried to cut glass with it, even though the saw factors are all same. I don't mean to make an unscientific analogy that holds no worth to it, like the infamous "running through a forest" one and loudspeaker cables. Personnaly, I've had no problems with my CD-R's and think they sound quite fine.
Ezmeraldall, I suppose dye matters to the extend that some manufacturers obviously did a better job. What I mean is that on Memorex I had to throw out several CDRs after copying since they were unreadable. I generally have had no such problems with Sony or Smart & Friendly or TDK or Nashua (even with 80 minutes disks). Originals reflect light better than CDRs that in turn are more reflective than CDRW. So I would assume that CDRWs have the potential to introduce more errors than CDRs and thus the quality could degrade more. I really have no way to tell what happens in reality, as I have no equipment to verify if all bits were transferred OK to the copy. To my ears copies usually sound indistinguishable from the original even through my Sennheiser HD600 headphones. Of course, my source is a modified Sony ES player, so it is not top of the line in many respects - that might be masking some very subtle differences that other people might be hearing indeed - I also agree with the other people here who said recording at lower speed (1x) should be better than higher speed. Obviously there is some difference in the way CDR/CDRW disks are perceived by players (both computer and audio) as they take significantly longer to initialize (read the number of tracks and start playing) than original CDs. I don't know why. I usually copy CDs from one CD-ROM to the CD burner directly and do not go through the hard drive. If I'm making a mix from several CDs, I usually make it piece by piece on a rewritable CD and then copy the whole thing to a CDR if I want to keep it. Sometimes I just leave it on the CDRW that my player reads OK too. This way if there are problems I don't waste the blank. I get almost 100% playable copies when I do a disc copy. Where I get problems sometimes is mixing CDs so if I do the mixing on a rewritable CD first, then verify it is OK and then copy the whole CD I'm almost certain it will work as audio CD. Kocho
For CDR technology to be useful as a computer data media requires vanishingly small rate of uncorrectable errors during the transcription. When was the last time you had a "bad" data or program file on a CD? This means the post-correction error rate must far better than 1 bit in every 10 billion. (In round numbers, there's about 5 billion bits of data on a CD). If the post-correction error rate were not that low, CD-R would not be reliable enough for use in the computer industry. When I say "correction", I mean recovery of the original data provided by the error-correction coding used for both audio and data CD formats. Think about it: a computer program will not tolerate interpolation of bad data. So no way is an alleged difference in sound due to data errors, unless consumer CD-R burners are truly, truly, crappy and do have much higher data error rates as compared to computer burners and CD-ROMs. A different issue is whether clock jitter differs when reading CD-R vs a stamped CD.
I would add to the response of 1439bhr the following: There might not be any errors on the copy. In fact as 14 says there should not be any. However, the reflective properties of CDR and CDRW are different than these of regular CDs. This is the main reason some audio players do not read them at all. Others misinterpret quite a few bits because of difficulties reading them. They have error correction algorythms that are meant originally to correct erors due to scratches, vibrations and dust. That is how audio data ends up interpolated and hence the sound might be inferior. Of course jitter remains a factor too... Kocho