grainy sounding high end system

Are you using any type of AC filter? You may also benefit from upgraded power cords. Both of these items are very good at removing the problems you describe. Check the threads for suggestions, and you can generally buy these things at half list or better right here. Good luck.

I will second the opinion on your front end. Might want to look at that. Also, you might want to look at the preamp. The choice of tubes does make a difference.
Sometimes you can "Tune" some of what you are hearing out with a different cable (interconnect) Cardas comes to mind here.
I really think you have a cummulutive effect. I agree with the above post that ML amps can get a little tizzy if all is not well upline. Could try a little speaker moving and see if that helps. Just don't aim those bad boys right at you.
Maybe your dealer will let you try a few different things. Put them in your system and see if you hear a difference. Might help you isolate some of it.
Also, check the cable between your front end and the DAC.

Is all of this plugged directly into the wall or are you using a power strip of some kind?

Matty

Make sure all of your connections are good. It never hurts to double check everything. Once I had a pre-amp wired backwards (L & R) internally on one input. Plug your amp straight into the wall. Avoid using a power strip if at all possible. Make sure the speakers are placed out in the room. I am sure you have played with speaker placement already. That won't fix a grainy sound. Power conditioning can help eliminate grain and lower the noise floor on the CD, DAC and Pre-Amp. Good power cords help too. Make sure your equipment is warmed up. Some amps don't open up until they are nice and toasty. I leave everything on 24/7 except my tube pre-amp.

Now, get yourself a new set of tubes from Andy at vintage tube services (www.vintagetubeservices.com). Go with his advice, and buy the best ones possible. Grainy sound points in the direction of bad tubes. I got improved bass, top end, detail and soundstage with my new tubes.

You could try playing with cables next or look into a better transport. Cables could be the problem, but only if you are using real cheap stuff. You are wasting your time playing with cables until you get new tubes. The transport would be the most expensive change, but probably a small improvement considering the DAC you have is highly rated.

One other thought, you might look into a tube ouput stage DAC or CD player.

Good Luck,

Stewart

Not knowing your cables, I will assume the cables are not the problem.

I would try to demo a different digital front end and see if that is your problem. Try to demo a nice one box CDP. If your sound is still grainy, the next likely suspect is your preamp. Make sure all of your tubes are good. Maybe even try a backup set of tubes if you have one. See if you can demo a nice preamp. If grain is still persisting with a demo preamp.... Make sure all of your speaker drivers are functioning. You could possibly have a blown or have a defective driver. You might want to check your speaker drivers first.

If none of the above solves your problem, well it is probably your cables. You need to demo different cables to see if that grain goes away.

If it's not your ICs or none of the above... you might want to goto an ear doctor and have your hearing checked.

Good Luck!

KF